Voltage sensor | INGEPAC™ SR GR
INGEPAC™ SR GR are voltage sensors based on resistive dividers for gas-insulated applications up to 20 kV.
The sensor’s transformation ratio is 20000/√3 : 2/√3 and complies with the requirements defined in IEC 61869-1:2007, IEC 61869-3:2011 and IEC 60044-7:2000 standards.
Features
- Accuracy in module: ±1% for the defined temperature range
- Accuracy in angle: ±1 º for the defined temperature range
- Insertion: type C symmetrical T connector
- Transformation ratio: 10,000:1
- Protection level in primary area: IP65
- Primary area material: resin
- Power consumed: <3 W
- Possible primary voltages assigned: 11 kV, 13.2 kV, 15 kV, 20 kV
MV voltage sensor | INGEPAC™ SR AR
INGEPAC™ SR AR are voltage sensors based on resistive dividers for medium voltage application in air and pole-mounted switchgear up to 24 kV.
The sensor’s transformation ratio is 10,000:1 and complies with the requirements defined in IEC 61869-1:2009 and IEC 61869-3:2011 standards.
Features
- Accuracy in module: ±1% for the defined temperature range
- Accuracy in angle: ±1 º for the defined temperature range
- Service conditions: -10 ºC to 60 ºC
- Transformation ratio: 10,000:1
- Protection level in primary area: IP65
- Primary area material: silicone
- Power consumed: <3 W
- Possible primary voltages assigned: 11 kV, 13.2 kV, 15 kV, 20 kV
PLC coupler | INGEPAC™ SR PG
INGEPAC™ SR PG is a device that allows PLC communications coupling in gas-insulated switchgear, being able to transmit and receive in the 1-32 MHz range.
PLC couplers enable a cost-effective private communication channel over the medium voltage cable feeders.
Features
- Frequency range: 1-32 MHz
- Accuracy: ±1 º for the defined temperature range
- Insertion: type C symmetrical T connector
- Transformation ratio: 10,000:1
- Protection level in primary area: IP65
- Primary area material: resin
- Power consumed: <3 W
- Possible primary voltages assigned: 11 kV, 13.2 kV, 15 kV, 20 kV