INGEREV® CITY Duo

The INGEREV® CITY Duo product line features an attractive design, and the necessary vandal-proof and weatherproof rating to allow it to be installed as part of the street furniture.
 
This charging station has been designed in compliance with the guidelines of international standard IEC 61851, allowing two vehicles to be charged simultaneously in modes 1, 2 and 3 of this standard.
 
Given the fact that two vehicles can be charged at the same time from the same charging station, it is possible to minimize the installation costs and the aesthetic impact of these infrastructures in public places. 
 
The charging points for the CITY Duo range are available in either a single or three phase version, with charging powers of up to 7.4 or 22 kW for each Type 3 socket outlet. What's more, they are equipped with a robust cable retention and locking system to prevent removal by unauthorized users.
 
In the event of a power failure, the INGEREV® CITY Duo charging stations are equipped with a battery that provides a minimum autonomy of one hour. During this time, cable retention and communications are guaranteed.

- Simultaneous charging of two vehicles in modes 1, 2 or 3 according to standard IEC 61851.
- RFID card identification.
- Measurement of the charging power and energy (MID)
- Unauthorized user access restriction.
- Operating autonomy in the event of a power failure.
- LED status indicators.
- Multi-language, customizable LCD display.
- Charging power adjustment.
- Deferred charge option.
- Local control and configuration via RS-485 and PC.
- Remote control and configuration via Ethernet and 3G (optional accessory).
- Compatible with OCPP protocol (optional accessory).
- Anti-graffiti paint.
- Double protection according to ITCBT-52
- DC leakage kit equivalent to Type B RCD, optional
- Type 2 socket outlet, with optional shutter.

- DLM - Dynamic Load Management (optional accessory).

SOFTWARE AND COMMUNICATIONS

One of the standard features of the INGEREV® CITY Duo charging stations is the possibility to interconnect with other charging stations in the INGEREV® range, through the RS-485 protocol, in groups of up to 10 interconnected charging stations.
 
By adding communications hardware (modem) for each group of stations, these can be connected through Ethernet networks or GPRS/3G and be integrated into a remote control centre that uses the OCPP open protocol. 

The INGEREV® CITY Duo range features embedded control software that is accessible via the INGEREV® WEB MANAGER browser, permitting the access, configuration and control of the equipment with no need for additional software.
 
More detailed information in the Download section.

TECHNICAL SUPPORT SERVICE

For any incident involving an INGEREV® charging station, you can contact our Technical Support Service (SAT), through the following e-mail:  

sat.me.energy@ingeteam.com.