The rolling mill for sections and profiles basically consists of alternating lamination in the so-called Roughing Mill (also known as blooming), usually composed by a Two High or Three High Stand - between three and thirteen different passes. The later phase is also performed alternately - up to three passes - in the Tandem group (composed by up to three different stands alternated between universal stands–H/V-and edging one’s. Finally, in the Finishing group, a simple final calibration pass is performed. 

The proposed control system for a Sections, classifies these into three different categories: Master Control System, Sequential Control Systems and Technological Control Systems.

In a section mill there will be at least three Master Control Systems. These will be in charge of the generation and control of speed and torque set-points of the main Edger & Roughing, Tandem and Finishing drives. It will also manage the speed set-points of certain auxiliaries, mainly roller tables.

Master Control System by means of the dedicated HMI’s also manages the mill pass schedule program, calculating the main rolling parameters, giving pass to pass roll settings, helping the operator in their supervisory task.

Regarding Sequential Control Systems, the number of them will be given by the program load to be managed, by the number of inputs-outputs to be treated, by the different nature of the elements to be controlled or for any other reason.

Basically in a large Section Mill there are the following - not including those related to the continuous casting machine and reheating furnace:

  • Edger and Roughing, sequential control system, including fast roll change,
  • Tandem and Finishing, sequential control system, including fast roll change,
  • Cooling, sequential control system,
  • Straightener, sequential control system,
  • Saws for cutting-to length, sequential control system,
  • Evacuation and Stacking, sequential control system,

Finally the Technological Control Systems deal with the tasks related to the process: The regulation of the Heating Furnace will be controlled by one of these systems (the kinematics of the Furnace is managed by a Sequential Control System). 

Likewise, the use of hydraulic stand capsules for Tandem and Finishing stands adjustment is managed by the TCS’s, controlling each one of the hydraulic axes appertaining to the above mentioned sections – Hydraulic Gap Control, HGC - either in force or position mode, both in closed loop regulation.

Apoyamos, una vez más, al sector de la movilidad eléctrica en el evento de presentación del Plan Moves III by Nair
Ingeteam consolida su presencia en Panamá con su primer contrato con AES by Jara
Se trata de un contrato para prestar servicios de operación y mantenimiento en la subestación del parque eólico de Penonomé con el cliente AES Panamá, la generadora de electricidad más grande del país.

Ingeteam Service comenzó sus trabajos en Panamá en el año 2012 y tras casi 10 años en el país este nuevo contrato con AES consolida su posicionamiento en Latam.


Las bombas de Indar llevarán agua de alta mar hasta los hogares de California by Nair
Ingeteam y la Consejería de Educación se reúnen con la primera promoción de alumnos de formación dual en energías renovables by Jara
La formación dual se imparte en el Centro Integrado de Formación Profesional Aguas Nuevas de Albacete.
Ingeteam acoge en su centro de operaciones de Albacete a los alumnos del CIFP Aguas Nuevas, donde la empresa cuenta con la prestigiosa certificación GWO (Global Wind Organisation), estándar mundial de formación en energía eólica.
A lo largo de los dos cursos, los alumnos combinan la formación en el centro educativo con la formación teórico-práctica en Ingeteam.
Ingeteam presenta una nueva metodología robusta de desarrollo de firmware para controladores eólicos by Anneleen
Ingeteam ha anunciado que su metodología de desarrollo de firmware ha demostrado reducir significativamente la fase crítica de validación y certificación in situ gracias a su sólido proceso de calificación. Esto acelera el tiempo de comercialización y la capacidad de producción comercial de los nuevos desarrollos de parques eólicos al tiempo que garantiza el más alto nivel de confiabilidad en campo.
Ingeteam suministra un compensador de potencia reactiva para una subestación en México by Nair

Two High Stand mill, Arkansas Steel Associates, ASA (USA)

Medium Size Section Mill Olaberria

Light Section Straightener machine, ArcelorMittal Bergara, Spain

Do you need more info?

I agree to receive commercial communications from Ingeteam
I have read and I agree to Ingeteam´s privacy terms.
* You have to accept the Ingeteam´s privacy terms.

Ingeteam Power Technology

Industry

Parque Tecnológico de Bizkaia
Edificio 106
48170 Zamudio - Bizkaia SPAIN
Tel: +34 94... See phone
industry@ingeteam.com;