INGECON HYBRID AC Link (2.4-6 kW)

It manages the power achieving an optimum balance between production, storage and consumption. In case of need, it connects and controls an auxiliary generator.

Featuring an advanced battery management technology, it ensures the maximum life of the storage system, by controlling constantly the battery temperature using a three-wire PT100 sensor.

INGECON HYBRID AC Link can create single-phase and three-phase stand-alone installations, as well as increasing the system power by connecting several inverters in parallel.

INGECON HYBRID AC Link

• Data sheet

INGECON HYBRID AC Link TL

• Data sheet

We want to provide the best customer service to our clients. That is why this product is not available in every country.

If you are in Italy, France or Brazil, you can buy it from our subsidiary:

If you are in Spain or Portugal, you can purchase it from any of our official distributors:

If you are in Croatia, you can purchase it from our distributor:

If you are in any other country, we are sorry to tell you that this product is not available.

• Two solar PV MPPT inputs.
• Output power: 3, 4.5 or 6 kW.
• Compatible with LV and HV batteries.
• Up to 13.5A of maximum input PV current along all the MPPT voltage range.
• Energy management system (EMS) inside.
• Suitable for on-grid and off-grid systems.
• Wi-Fi and Ethernet communications.
• RS-485 communication for the wattmeter.
• CAN Bus 2.0 communication for the batteries' BMS (battery management system).
• Two configurable digital inputs.
• Two configurable potential-free outputs.
• Ease of maintenance.
• Suitable for indoor and outdoor installation (IP65).
• Free software INGECON SUN Monitor for system monitoring.
• Fast and easy commissioning thanks to the INGECON SUN Monitor app.
• It can operate as a pure solar inverter, allowing to add the batteries at a later stage.
• Peak shaving functionality.
• Modbus TCP / Wi-Fi communication with single-phase EV chargers.
• Configuration of the battery charge / discharge times.

For any incident involving equipment from the INGECON® SUN product range, you can contact our Technical Support Service, through the following email: sat.solar.energy@ingeteam.com.

Standard accessories

• DC breaker for the solar PV array.
• Pre-charging system at the battery input.
• AC overvoltage protection.
• Insulation faults.
• Short-circuits and overloads at the output.
• Anti-islanding with automatic disconnection.
• 2 digital inputs.
• 2 potential free outputs.
• Relay for the neutral to earth connection for critical loads in TT systems.