DUAL B SERIES (3600kVA/1500Vdc)

Greater power density

These PV central inverters feature more power per cubic foot. They are able to manage a greater amount of power in two power blocks with a combined AC output line.

Latest generation electronics

The B series inverters integrate an innovative control unit that runs faster and performs a more efficient and sophisticated inverter control, as it uses a last-generation digital signal processor. Furthermore, the hardware of the control unit allows some more accurate measurements. These inverter series feature a lower power consumption thanks to a more efficient power supply electronic board.

Integrated DC and AC connections

As well as the other INGECON SUN Power series, the B series inverters integrate the DC and AC connections in the same cabinet, facilitating maintenance and repair work. The AC output lines are combined in a single busbar in order to facilitate installation works and the connection with the MV transformer.

Maximum protection

These three-phase inverters are equipped with a motorized DC breaker to decouple the PV generator from the inverter. Optionally, they can be supplied with an AC circuit breaker in addition to fuses, grounding kit and input current monitoring.

Grid support

This inverter series has been designed to comply with the most demanding grid connection requirements in the world. They feature then a low voltage ride-through capability, they can control the active power delivered to the grid and they can also deliver reactive power.

Thanks to a sophisticated control algorithm, this equipment can guarantee maximum efficiency depending on the PV power available. Thus, 98.9% maximum efficiency values can be achieved. Furthermore, they have been designed to ensure a service life of more than 20 years.

• Grid support: these PV inverters feature a low-voltaje ride-through capability, and they can deliver reactive power and control the active power delivered to the grid.
• Maximum efficiency values of up to 98.9%.
• The maximum power is delivered up to 86ºF / 30ºC ambient temperature.
• They allow to ground the PV array, either the positive or the negative pole.
• Advanced MPPT algorithm that makes it posible harnessing the maximum amount of power from the PV array.
• Main protection devices supplied as standard.
• Standard 5-year warranty, extendable up to 20 years.
• Ease of maintenance thanks to its modularity. If a power block fails, the power is then distributed amongst the remaining blocks.
• Various applications for monitoring and recording the inverter's internal operating variables are included at no extra cost: INGECON SUN Manager, INGECON SUN Monitor and its iSun Monitor Smartphone application.
• Hardware protection via firmware.
• Additional protection for the power stack, as it is air cooled by a closed loop.

Integrated accessories

• Motorized DC switch for the automatic disconnection of the inverter from the PV array.
• Four DC fuse-holders per power block. Non-grounded inverters have both poles protected.
• Protection against DC reverse polarity.
• Protection against insulation failure.
• Anti-islanding with automatic disconnection.
• DC and AC surge arresters, type 2.

Optional accessories

• Inter-inverter communication via Ethernet or Bluetooth.
• GSM/GPRS remote communication.
• DC fuses.
• Monitoring of the input currents.
• Auxiliary services kit.
• LVRT kit (low-voltage ride-through capability).
• Wattmeter on the AC side.
• Kit for operating at an ambient temperature of -22ºF / -30ºC.