The MV100 series of the INGEDRIVETM family is composed of medium-voltage converters with a three-level topology and built-in HV-IGBTs. They can be air- or water-cooled and are designed to control both synchronous and asynchronous motors in industrial and marine applications.
INGEDRIVETM equipment is parametrised and personalised using configuration tools supplied with the equipment. Furthermore, the whole range comes with a parametrisable control unit and a powerful 12" user panel to facilitate daily use and maintenance tasks.
The MV100 series is a safe, flexible and user-friendly solution with a modular design enabling it to cover a wide range of medium-voltage powers and voltages.
The MV100 series complies with the IEC standards for low-voltage equipment as well as having the following specific certification:
In order to analyse the potential, architecture and adaptability of the control system offered by INGEDRIVETM equipment, three areas need to be considered.
The whole INGEDRIVETM family has powerful, user-friendly interface tools developed for parameterisation, commissioning, use and maintenance and for users of all levels, using the following:
The control hardware is based on standard shared modules for the whole INGEDRIVETM family, both in low and medium voltage. The control system consists of the following main modules: PMM [Power Management Module] and CCU [Converter Control Unit] which permit a multi-drive configuration and can be used for different topologies.
The main characteristics are as follows:
Standard INGEDRIVETM devices contain a PLC whose programming is based on the 61131-3 standard, allowing the client to use their own logic and program their own signals and communication according to their needs.
The INGEDRIVETM family's control system is so powerful and versatile that it can be adapted to the different converter topologies of the whole range, such as the following:
Furthermore, the control system is capable of not only managing single-drive but also multi-drive configurations, adapting itself to the requirements of different applications with the following functional features:
Ingeteam Power Technology, S.A
Parque Tecnológico de Bizkaia, Edificio 110
CP: E-48170 Zamudio, Spain
Tel: +34 944... Ver Teléfono
Tel: +34 946 55 22 55