INGECON SUN STORAGE 3-6TL M

Hybrid inverter totally equipped

This hybrid inverter (solar + batteries) is a single-phase device that allows a bidirectional flow of energy between the batteries and the loads. This inverter is suitable for both grid-connected and off-grid systems, as it can generate an AC grid, acting as grid manager and achieving a balance between generation, storage and consumption. It also has back-up functionality for self-consumption systems, generating the grid to feed the loads in case of a grid outage.

Integrated PV inputs

These battery inverters integrate two PV inputs in order to offer greater functionalities. These PV inputs reduce the cost of the installation, allowing to have a battery inverter and a PV inverter in a single equipment.

EMS Inside

The inverter is equipped as standard with an EMS (Energy Management System) that permits more advanced functionalities, as self-consumption strategies. Thanks to the built-in EMS, the installation can be monitored at all times via a PC or mobile phone with the free INGECON SUN Monitor application, available at Play Store and App Store.

Extended technical information

• Two solar PV MPPT inputs.
• Output power: 3, 4.5 or 6 kW.
• Compatible with LV and HV batteries.
• Up to 13.5A of maximum input PV current along all the MPPT voltage range.
• Energy management system (EMS) inside.
• Suitable for on-grid and off-grid systems.
• Wi-Fi and Ethernet communications.
• RS-485 communication for the wattmeter.
• CAN Bus 2.0 communication for the batteries' BMS (battery management system).
• Two configurable digital inputs.
• Two configurable potential-free outputs.
• Ease of maintenance.
• Suitable for indoor and outdoor installation (IP65).
• Free software INGECON SUN Monitor for system monitoring.
• Fast and easy commissioning thanks to the INGECON SUN Monitor app.
• It can operate as a pure solar inverter, allowing to add the batteries at a later stage.
• Peak shaving functionality.
• Modbus TCP / Wi-Fi communication with single-phase EV chargers.
• Configuration of the battery charge / discharge times.

For any incident involving equipment from the INGECON® SUN product range, you can contact our Technical Support Service, through the following email: sat.solar.energy@ingeteam.com.

Standard accessories

• DC breaker for the solar PV array.
• Pre-charging system at the battery input.
• AC overvoltage protection.
• Insulation faults.
• Short-circuits and overloads at the output.
• Anti-islanding with automatic disconnection.
• 2 digital inputs.
• 2 potential free outputs.
• Relay for the neutral to earth connection for critical loads in TT systems.