Voltage sensors and PLC couplers | INGEPAC™ SR

Voltage sensor | INGEPAC™ SR GR

INGEPAC™ SR GR are voltage sensors based on resistive dividers for gas-insulated applications up to 20 kV.

The sensor’s transformation ratio is 20000/√3 : 2/√3 and complies with the requirements defined in IEC 61869-1:2007IEC 61869-3:2011 and IEC 60044-7:2000 standards.

 

Features

  • Accuracy in module: ±1% for the defined temperature range
  • Accuracy in angle: ±1 º for the defined temperature range
  • Insertion: type C symmetrical T connector
  • Transformation ratio: 10,000:1
  • Protection level in primary area: IP65
  • Primary area material: resin
  • Power consumed: <3 W
  • Possible primary voltages assigned: 11 kV, 13.2 kV, 15 kV, 20 kV

 

 

MV voltage sensor | INGEPAC™ SR AR

INGEPAC™ SR AR are voltage sensors based on resistive dividers for medium voltage application in air and pole-mounted switchgear up to 24 kV.

The sensor’s transformation ratio is 10,000:1 and complies with the requirements defined in IEC 61869-1:2009 and IEC 61869-3:2011 standards.

 

Features

  • Accuracy in module: ±1% for the defined temperature range
  • Accuracy in angle: ±1 º for the defined temperature range
  • Service conditions: -10 ºC to 60 ºC
  • Transformation ratio: 10,000:1
  • Protection level in primary area: IP65
  • Primary area material: silicone
  • Power consumed: <3 W
  • Possible primary voltages assigned: 11 kV, 13.2 kV, 15 kV, 20 kV

 

 

PLC coupler | INGEPAC™ SR PG

INGEPAC™ SR PG is a device that allows PLC communications coupling in gas-insulated switchgear, being able to transmit and receive in the 1-32 MHz range.

PLC couplers enable a cost-effective private communication channel over the medium voltage cable feeders.

 

Features

  • Frequency range: 1-32 MHz
  • Accuracy: ±1 º for the defined temperature range
  • Insertion: type C symmetrical T connector
  • Transformation ratio: 10,000:1
  • Protection level in primary area: IP65
  • Primary area material: resin
  • Power consumed: <3 W
  • Possible primary voltages assigned: 11 kV, 13.2 kV, 15 kV, 20 kV

Brochures

INGEPAC™ SR GR flyer

Voltage sensor based on resistive dividers for gas-insulated applications up to 20 kV

INGEPAC™ SR AR flyer

Voltage sensors for medium-voltage applications in air and pole-mounted

INGEPAC™ SR PG flyer

Device that allows PLC communications coupling in gas-insulated switchgear


Other Documents

INGEPAC™ DA AU flyer

Automation and control device for MV feeders or RMU

  • 18/06/2024

    Electric & Hybrid Marine

    The world’s leading exhibition and conference for maritime electrification, decarbonization and GHG reduction solutions returns to Amsterdam &nd...
  • 19/06/2024

    Power2Drive Europe

    Power2Drive Europe is the international exhibition for charging infrastructure and e-mobility. Under the motto “Charging the future of mobility&...
  • 27/08/2024

    Intersolar South America

    With three parallel energy exhibitions and one special exhibition, The smarter E South America is LATAM's innovation hub for the new energy world....

Do you need more info?

I agree to receive commercial communications from Ingeteam
I have read and I agree to Ingeteam´s privacy terms.
* You have to accept the Ingeteam´s privacy terms.
Smart Grids - Social media

Newsletter: Subscribe

LinkedIn: View page

 

Smart Grids - Contact

E-mail: marketing.pga@ingeteam.com

Phone: (+34) 944 039 600

Address: Ingeteam Power Technology, S. A. - Parque Tecnológico de Bizkaia, Edificio 110 - Zamudio, 48170, Spain