DUAL INGECON SUN Power (1000V/1500V)

A three-phase central inverter family, with rated powers ranging from 2,340 to 3,600 kVA.

These high-efficiency PV inverters feature the highest power density in the market -317kW/m³, for its 1,500V version-. They have been designed to contribute to the quality and stability of the electric system, implementing several grid-support functionalities. They feature low-voltage ride-through capability and they can deliver reactive power even during the night. They also control the active power delivered into the grid.

Latest generation electronics

The Dual B Series PV inverters integrate an innovative control unit that runs faster and performs a more efficient and sophisticated inverter control, as it uses a last-generation digital signal processor. Furthermore, the hardware of the control unit allows some more accurate measurements and very reliable protections.

Maximum efficiency

Through the use of innovative electronic conversion topologies, efficiency values of up to 98.9% can be achieved. Thanks to a sophisticated control algorithm, these PV inverters can guarantee the maximum efficiency depending on the PV power available.

Ingeteam offers two different B series inverters to choose from: 1,000Vdc and 1,500Vdc, featuring both IEC and UL configurations.

Integrated accessories:

• Combiner box with DC isolators.
• Motorized DC switch to automatically disconnect the inverter from the PV array.
• Motorized AC circuit breaker.
• Lightning induced DC and AC surge arrestors, type II.
• Up to 12 pairs of fuse holders (up to 15 if the combiner box is not desired).
• Protection against DC reverse polarity.
• Protection against short-circuits and overloads at the output.
• Protection against DC insulation failures.
• Anti-islanding with automatic disconnection.
• Hardware protection via firmware.
• Additional protection for the power electronics, as it is air cooled by a closed loop.
• Low Voltage Ride-Through capability.

Optional accessories:

• Protection against AC insulation failure.
• Smart grounding kit.
• Sand-trap kit.
• DC fuses.
• Heating kit for operating at an ambient temperature of down to -22ºF.
• String DC currents monitoring.
• PID prevention kit.
• Night time reactive power injection.

• UL1741SA, IEEE1547 and Rule21 compliance.
• Higher power density.
• 98.9% maximum efficiency.
• Latest generation power electronics.
• More efficient electronic protection.
• Night time supply to communicate with the inverter at night.
• Easier maintenance thanks to its new design and enclosure.
• Lightweight spare parts.
• It allows to ground the PV array.
• Easy-to-replace components.
• Two communication ports available, allowing a fast and simultaneous plant control and monitoring.
• It can operate in weak power grids with a low SCR.
• New AC output design that facilitates a direct close-coupled connection with the MV transformer.
• Standard 5 year warranty, extendable for up to 25 years.