Voltage sensors and PLC couplers | INGEPAC™ SR

Voltage sensor | INGEPAC™ SR GR

INGEPAC™ SR GR are voltage sensors based on resistive dividers for gas-insulated applications up to 20 kV.

The sensor’s transformation ratio is 20000/√3 : 2/√3 and complies with the requirements defined in IEC 61869-1:2007IEC 61869-3:2011 and IEC 60044-7:2000 standards.

 

Features

  • Accuracy in module: ±1% for the defined temperature range
  • Accuracy in angle: ±1 º for the defined temperature range
  • Insertion: type C symmetrical T connector
  • Transformation ratio: 10,000:1
  • Protection level in primary area: IP65
  • Primary area material: resin
  • Power consumed: <3 W
  • Possible primary voltages assigned: 11 kV, 13.2 kV, 15 kV, 20 kV

 

 

MV voltage sensor | INGEPAC™ SR AR

INGEPAC™ SR AR are voltage sensors based on resistive dividers for medium voltage application in air and pole-mounted switchgear up to 24 kV.

The sensor’s transformation ratio is 10,000:1 and complies with the requirements defined in IEC 61869-1:2009 and IEC 61869-3:2011 standards.

 

Features

  • Accuracy in module: ±1% for the defined temperature range
  • Accuracy in angle: ±1 º for the defined temperature range
  • Service conditions: -10 ºC to 60 ºC
  • Transformation ratio: 10,000:1
  • Protection level in primary area: IP65
  • Primary area material: silicone
  • Power consumed: <3 W
  • Possible primary voltages assigned: 11 kV, 13.2 kV, 15 kV, 20 kV

 

 

PLC coupler | INGEPAC™ SR PG

INGEPAC™ SR PG is a device that allows PLC communications coupling in gas-insulated switchgear, being able to transmit and receive in the 1-32 MHz range.

PLC couplers enable a cost-effective private communication channel over the medium voltage cable feeders.

 

Features

  • Frequency range: 1-32 MHz
  • Accuracy: ±1 º for the defined temperature range
  • Insertion: type C symmetrical T connector
  • Transformation ratio: 10,000:1
  • Protection level in primary area: IP65
  • Primary area material: resin
  • Power consumed: <3 W
  • Possible primary voltages assigned: 11 kV, 13.2 kV, 15 kV, 20 kV

Brochures

INGEPAC™ SR GR flyer

Voltage sensor based on resistive dividers for gas-insulated applications up to 20 kV

INGEPAC™ SR AR flyer

Voltage sensors for medium-voltage applications in air and pole-mounted

INGEPAC™ SR PG flyer

Device that allows PLC communications coupling in gas-insulated switchgear


Other Documents

INGEPAC™ DA AU flyer

Automation and control device for MV feeders or RMU

  • 04/04/2024

    EFICAM

    EFIC@M, a lo largo de sus siete anteriores ediciones, ha conseguido posicionarse como referente de tecnología, innovación, formación e información de ...
  • 16/04/2024

    MIDDLE EAST ENERGY

    Middle East Energy, the region's most anticipated energy event is all set to be back with its 49th edition, running from the 16th to the 18th of A...
  • 22/04/2024

    Hannover Mese

    HANNOVER MESSE is the most important international platform and hot spot for industrial transformation - with excellent innovations or unusual product...

Do you need more info?

I agree to receive commercial communications from Ingeteam
I have read and I agree to Ingeteam´s privacy terms.
* You have to accept the Ingeteam´s privacy terms.
Smart Grids - Social media

Newsletter: Subscribe

LinkedIn: View page

 

Smart Grids - Contact

E-mail: marketing.pga@ingeteam.com

Phone: (+34) 944 039 600

Address: Ingeteam Power Technology, S. A. - Parque Tecnológico de Bizkaia, Edificio 110 - Zamudio, 48170, Spain