https://www.ingeteam.com/it RSS feeds for Ingeteam 60 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3214/language/en-US/A-village-school-in-Malawi-now-has-clean-energy.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3214 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3214&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3214/language/en-US/A-village-school-in-Malawi-now-has-clean-energy.aspx This is a stand-alone system, managed by a hybrid inverter (solar + batteries) donated by Ingeteam. The Chamalire village school in Malawi finally has an electricity supply thanks to the project implemented by the Zikomo Africa NGO. The village is located close to the parish of Benga in the central area of the country. This project has made it possible to improve not only the students’ possibilities of studying but also the quality of life and working conditions of the teaching staff, as they now have light and electricity in their homes. Nine teachers' homes and one girls' dormitory, built so that young girls no longer need to face the dangers of travelling a number of kilometers to their home villages at night, are also now benefiting from this clean energy system. Until now, neither the school nor any other building in Chamalire had an electricity supply. The installation has 20 solar panels which generate 7.2 kW of solar power, and a lithium battery energy storage system with a capacity of 19.3 kWh. The Ingeteam hybrid inverter, equipped with an EMS energy management system, is responsible for controlling the entire energy supply to the installation. The INGECON SUN STORAGE 6TL M inverter, with a rated power output of 6 kW, features two photovoltaic inputs for up to 11.5 kW of solar power, and a battery input that is valid for high voltage and low voltage batteries alike. Although in this case the inverter is functioning as a stand-alone system, it can also operate in grid-connected systems in either self-consumption or back-up mode. Ingeteam has highlighted the good work of the Zikomo Africa NGO in Malawi and the ease with which this collaboration has been performed, coming within the framework of the corporate social responsibility (CSR) actions that Ingeteam assiduously carries out. Tue, 03 Aug 2021 10:40:00 GMT f1397696-738c-4295-afcd-943feb885714:3214 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3211/language/en-US/Future-challenges-for-the-energy-sector.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3211 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3211&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3211/language/en-US/Future-challenges-for-the-energy-sector.aspx The energy transition to a decarbonised society, which counteracts the effects of climate change is not only a trend, but a necessity. Political authorities in the majority of countries around the world have finally got down to work and established guidelines to support this transition. Particularly in Europe, the strategy outlined in "The Green Deal" will allocate a large portion of the "Next Generation EU" recovery plan investment to finance this transition. The other factor in solving the equation is technological development. In this sense, a clear effort has been made in the past few years to obtain increasingly competitive technology solutions related to renewable energies and electrification. Therefore, it has been possible to offer the market renewable generation solutions that are more competitive for the same installed power capacity than conventional generation facilities, and electrical energy has increased its share of consumption like never before with electric mobility, industrial heating and cooling, storage, etc. The pace of deployment of the electricity infrastructure needed to accommodate new generation assets, electricity interconnections, new electricity consumers, self-consumption, etc., is key to facilitating investment in the technological development of the energy industry supply chain. This phenomenon must consider the specific reality of electricity generation based on the natural environment. Thus, conditions at certain geographical locations will be more favourable for the implementation of new generation plants: wind, solar photovoltaic, hydroelectric, biomass or biofuel. Energy conversion technology must be developed to offer the best possible solutions in each case. In this sense, work is ongoing on power electronics platforms and electric generators to establish the optimal combinations that will provide the best yields from available energy sources: sun, wind, water, biomass. On the other end of the power transmission line, lie electricity consumers, and therein lies the other energy challenge: achieve the most efficient possible consumption of available energy. Once again, energy conversion systems must be intelligently applied to current and future energy consumption needs, electric vehicles (road and rail), maritime electric propulsion systems for all types of vessels, and in the not-so-distant future, air transport. Hydrogen has recently gained momentum as an energy application vector to be developed in the near future. The challenges posed by energy for human beings are many, but thanks to power conversion technology we will be capable of meeting them to ensure sustainability. Always through the prism of renewable energies. As we have been saying for some years now at Ingeteam, “the future will be renewable, or there won’t be a future”. Our challenge is to place electrical and electronic technology at the service of the evolution required by the new solutions for harnessing renewable resources so that this almost infinite natural resource can be channelled towards achieving the final goal of electrical energy consumption: clean consumption. Adolfo Rebollo CEO Ingeteam   Thu, 29 Jul 2021 09:48:00 GMT f1397696-738c-4295-afcd-943feb885714:3211 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3208/language/en-US/Ingeteams-hybrid-inverter-is-compatible-with-the-BYD-Premium-high-voltage-batteries.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3208 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3208&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3208/language/en-US/Ingeteams-hybrid-inverter-is-compatible-with-the-BYD-Premium-high-voltage-batteries.aspx 23 of July, 2021. Ingeteam and BYD have tested and certified at their respective R&D laboratories, the compatibility of the BYD Battery-Box Premium HVS and HVM high voltage batteries with Ingeteam's INGECON® SUN STORAGE 1Play TL M hybrid inverter (solar-plus-storage inverter). The use of both items of equipment together makes it possible to create hybrid systems that combine PV power generation with energy storage, with no need to add additional solar PV inverters. Moreover, Ingeteam's hybrid inverter, in combination with the BYD batteries, allows for operation in off-grid, back-up (UPS) and self-consumption modes. Thus, for grid-connected systems, the solar energy generated during the day can be stored for night-time consumption, giving the highest possible self-consumption ratios and, thanks to the possibility of operating in backup mode (UPS), the power supply is maintained in the event of a grid outage. The BYD high-voltage lithium iron phosphate (LFP) batteries, with capacities ranging from 5.1 kWh to 22.1 kWh (depending on the model) are designed for residential and commercial use. Their patented modular plug-in design makes it possible to connect the different battery modules with no need for wiring, making installation incredibly quick and easy. Specifically, the following BYD battery models are compatible with the Ingeteam hybrid inverter: HVS (5.1, 7.7 and 10.2) and HVM (8.3, 11.0, 13.8, 16.6, 19.3 and 22.1). For its part, the Ingeteam inverter makes it possible to connect a battery bank and two PV arrays to the same unit, thereby reducing the cost of the system as a whole. It features two PV inputs, each of which has its own maximum power point tracking system (MPPT), allowing it to manage up to 11.5 kW of power from the solar panels which can be roof-mounted with two orientations. This 3 or 6 kW single-phase transformerless inverter has been designed for use in residential and commercial installations alike. Moreover, this inverter is supplied with the EMS control system as standard, allowing it to deploy advanced functionalities with no need to add another device for additional control. The monitoring of the hybrid system is carried out easily and intuitively thanks to the software developed by Ingeteam: INGECON® SUN Monitor, which allows access to all the data of the photovoltaic installation, the batteries, etc., so that the user has total control over his/her electricity consumption. Mon, 26 Jul 2021 06:00:00 GMT f1397696-738c-4295-afcd-943feb885714:3208 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3196/language/en-US/Ingeteam-is-awarded-3-modular-e-house-substations-in-Portugal.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3196 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3196&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3196/language/en-US/Ingeteam-is-awarded-3-modular-e-house-substations-in-Portugal.aspx Ingeteam has been awarded the supply of three modular turnkey substations for different projects in Portugal, enabling the evacuation of 79 MW of photovoltaic energy to the grid. This supply is part of Ingeteam's commitment to lead the energy transition to accelerate the decarbonization of the economy. The scope of supply includes the electrical room/e-House with its HVAC and fire safety system, the protection, control and measurement cabinets, Ancillary Services cabinets, interconnection cabinets with the DSO (Distribution System Operator), where it is evacuated power, and the DC power system of all equipment. The project includes all the services associated with the supply, including the interconnection protection, control and measurement solution in accordance with the criteria defined by the DSO as well as the communications of the system with the promoter Control Center and the DSO Operation Office. Modular substations/e-House together with Ingeteam's flexibility to adapt to the protection, control and measurement needs at the interconnection point allow: Simplify the management, coordination and time dedicated to the control of the project by having a single interlocutor during its execution Greater efficiency in solution design and engineering times, especially in standardized solutions Enable the execution of complete FAT tests, ensuring the reliability of the solution before its shipment to the field Accelerate field work by requiring less time for its execution Minimize the times, costs and requirements associated with the civil works of the project Reduce the physical footprint / space required for the PAC solution in the substation Thu, 08 Jul 2021 09:00:00 GMT f1397696-738c-4295-afcd-943feb885714:3196 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3194/language/en-US/New-IO-iRTSX-module-for-accelerometer-readings.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3194 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3194&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3194/language/en-US/New-IO-iRTSX-module-for-accelerometer-readings.aspx Last December, Ingeteam launched a new IP67 module on the market for remote (distributed) acquisition of iRTXS accelerometers via an Ethernet bus.  The IO iRTSX acquisition module is a module distributed via Ethernet bus with the following features: Real Time. Physical medium: standard Ethernet. Flexible topology to optimise wiring costs. Compatible topologies: Star (via a switch). In bus mode (internal switch in remote I/Os and dual input and output connector for Ethernet in the RIO). Combination of both topologies (star and bus). Capacity for distributing power and communicating via a single (POE = PowerOverEthernet). Capacity for up to 32 remote nodes. Bandwidth up to 4KHz (communication with remote I/Os with up to 250 us for input reading and output writing). Isochronous. Allows sampling and remote action in the event of a sampling error / action better than 1 us. Auto-detection (Plug&Play). The master (IC2p) uses the logical address (slave number from 0 to 31, configured in the master for that slave and in the slave with switches) and automatically detects the slave in the bus, switching to OPERATE mode with the slave (if that slave is configured in the master). HotSwap. The slave is detected on-the-fly and can be hot-inserted in the bus. 100Mbits physical. Multimaster. The same physical bus can run several masters over various slaves (current ratio 1 to 1, with future slave capacity to publish data to “n” masters, depending on monitoring requirements). Coexistence with conventional TCP/IP traffic for other elements in the network (the iRTSX bus coexists in a conventional Ethernet network, without the need for an exclusive medium) but does not allow TCPIP exchange between the iRTXS master and slave. Up to 35 m  between two active components (limited by the attenuation of the ETH that is used). An active component is a switch, a master, a slave, etc. Publisher/Subscriber in OPERATE mode.   Izaskun Apraiz Elguezabal | Automation Devices Marketing Manager Mon, 05 Jul 2021 07:32:00 GMT f1397696-738c-4295-afcd-943feb885714:3194 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3193/language/en-US/Ingeteam-and-the-CFAA-Advanced-Aeronautics-Manufacturing-Centre-collaborate-in-monitoring-machining-processes-for-the-aeronautics-industry.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3193 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3193&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3193/language/en-US/Ingeteam-and-the-CFAA-Advanced-Aeronautics-Manufacturing-Centre-collaborate-in-monitoring-machining-processes-for-the-aeronautics-industry.aspx Last April, Ingeteam supplied the CFAA with an INGESYS IC3 system to monitor high-sensitivity sensors that will be integrated in a broaching bench used to perform R&D on machining processes for low-pressure turbine discs for aircraft engines. The INGESYS IC3 solution will be used to monitor high-sensitivity sensors during the broaching process, collecting data on force, acceleration and CNC variables that will then serve to prevent poor cutting conditions or unexpected tool breakage. Thanks to the calculating capacity of the INGESYS IC3, the signals obtained from the various sensors will be able to be measured and processed in real time. Ignacio Ortiz de Urbina Antia | Automation Devices Commercial Fri, 02 Jul 2021 07:18:00 GMT f1397696-738c-4295-afcd-943feb885714:3193 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3190/language/en-US/Ingeteam-equips-Talgos-new-High-Speed-vehicles.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3190 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3190&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3190/language/en-US/Ingeteam-equips-Talgos-new-High-Speed-vehicles.aspx Ingeteam is supplying TALGO with the electric traction systems for 30 AVRIL trains, reaching speed of up to 330 km/h. The converters are produced at Ingeteam’s factory in Ortuella (Bizkaia).   Talgo has selected Ingeteam to supply the electric traction systems for 30 High Speed and multiple voltage trains that TALGO is manufacturing in the Basque Country, specifically at its plant in Rivabellosa (Álava). These vehicles will be homologated for services in Spain and France, and will reach commercial speed of up to 330 km/h. The first vehicle is currently undergoing on-track tests. The contract includes the design of the system and the supply of 120 high-power traction converters (2.4 MW), located on board, as well as the additional equipment (motors and traction transformers) that compose the traction system of the 60 tractor units. In this project, which has been a significant technological challenge, the traction system supplied by Ingeteam will bring significant advantages to the vehicle in terms of space, weight and efficiency. The design has also been conceived with the ease of maintenance activities in mind. Each vehicle is equipped with two tractor heads and its propulsive power of 9.6 MW, equivalent to 13 formula one. The converters will be manufactured at Ingeteam's plant in Ortuella (Bizkaia), which was inaugurated at the end of last year and is at full capacity.   Wed, 30 Jun 2021 07:59:00 GMT f1397696-738c-4295-afcd-943feb885714:3190 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3180/language/en-US/Ingeteams-technology-is-capable-of-powering-8-million-people-with-solar-energy.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3180 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3180&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3180/language/en-US/Ingeteams-technology-is-capable-of-powering-8-million-people-with-solar-energy.aspx Ingeteam has supplied 21 GW of solar inverter power worldwide and maintains more than 8 GW. Its technology is present in the main photovoltaic installations on the planet. Solar is the fastest growing renewable energy in the world. The solar inverters manufactured by Ingeteam can supply the equivalent of the consumption of approximately 8 million people, a population larger than that of countries such as Hong Kong, Bulgaria or Paraguay, thanks to its commitment to photovoltaic solar energy and the continuous development of technological improvements aimed at this sector. The boost that the company has given to the photovoltaic sector in recent years, which has increased year after year, has enabled it to reach 21 GW of installed power worldwide. Ingeteam has been supplying photovoltaic inverters for solar plants since 2001 from its factory located in Navarra. Likewise, it also has more than 8 GW of maintained solar power, distributed in more than 500 solar plants in 17 countries around the world, making it one of the main service providers for the solar sector in Spain and a leader in Latin America. Its equipment is present in some of the main photovoltaic installations on the planet, such as Noor Abu Dhabi, the largest photovoltaic plant in the world with an installed capacity of 1.17 GW. This plant also provides operation and maintenance services. In addition, the integration into the electrical grid of the energy generated in the solar plants also has equipment manufactured by Ingeteam. The energy produced in 280 photovoltaic farms and 10 solar thermal plants, totalling around 8.5 GW, is evacuated through substations controlled with its technology in 13 countries, highlighting the Nuñez de Balboa photovoltaic plant with 500 MW, being the largest in Europe. Also noteworthy is Ingeteam's penetration in markets such as Spain, Latin America, the Middle East, South Africa (leader in the African continent), and countries with high growth potential due to the large amount of installed power and under construction, such as Brazil or Australia, among others. Mon, 21 Jun 2021 09:53:00 GMT f1397696-738c-4295-afcd-943feb885714:3180 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3178/language/en-US/Introducing-INGEDRIVE-LV800-the-new-range-of-low-voltage-converters.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3178 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3178&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3178/language/en-US/Introducing-INGEDRIVE-LV800-the-new-range-of-low-voltage-converters.aspx October will witness the official launch of the new INGEDRIVE™ LV800 range, a further development of the long-established INGEDRIVE™ LV400. The new range of low-voltage, water-cooled frequency converters allows a power density increase of up to 35% compared to the previous range, thus improving the configurability and versatility for different applications. Such versatility will make the new member of the INGEDRIVE™ family a benchmark in high power low voltage converters, since it will be able to meet the needs of different sectors and applications such as marine propulsion, fan drives, pumping, etc. for mining and industry, as well as energy storage and control systems.  The new INGEDRIVE™ LV800 range allows up to 10.8MVA with an output voltage of 690V.   Stay tuned for the launch date! Iñaki Gorostiza | IMD Marketing Manager Mon, 21 Jun 2021 07:04:00 GMT f1397696-738c-4295-afcd-943feb885714:3178 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3173/language/en-US/Ingeteam-leads-the-wind-power-sector-with-its-technologies.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3173 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3173&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3173/language/en-US/Ingeteam-leads-the-wind-power-sector-with-its-technologies.aspx Ingeteam has a total of 52 GW of wind converter capacity worldwide and maintains more than 17 GW. Indar, Ingeteam Group has manufactured more than 1300 wind generators so far this year. In 2020, various equipment for energy storage in wind power plants have been provided The equipment provided by the Ingeteam Group in the wind energy sector enables it to supply the equivalent of the consumption of more than 11 million homes, a new record achieved thanks to its leading role in the supply of wind energy converters and generators, as well as the operation and maintenance work it carries out around the world. The company is the world's leading independent supplier of wind energy converters, with a delivered power of 52 GW. Indar's wind power business unit (Ingeteam Group), a leader in its segment, has supplied around 23,000 wind generators, equivalent to 42 GW of power. Ingeteam is a world leader in the provision of operations and maintenance services for renewable energy plants, with more than 17 GW maintained worldwide, of which 9.2 GW is wind energy. Furthermore, Ingeteam's protection and control systems are key when it comes to integrating this energy into the grid and guaranteeing supply to the different users. Currently, more than 17 GW of energy generated in more than 400 wind farms is evacuated through substations controlled with Ingeteam technology. In addition, the company is positioning itself as an important supplier of equipment for the storage of electrical energy in renewable energy plants. Ingeteam entered the wind energy sector in 1995, working on the development of variable speed machines. It was the first manufacturer to launch DFIG converters on the market. 25 years later, this technology is still the industry standard. Recently, Ingeteam launched a new generation of wind energy converters developed for high power DFIG applications in the 6 to 8 MW range, adapted to the needs of the strictest grid codes. The converters include a firmware development methodology that has proven to significantly reduce the critical on-site validation and certification phase due to its robust qualification process. The supply of converters is based on its agile and localised manufacturing strategy, which allows flexible delivery from state-of-the-art production facilities in Europe, Asia, North and South America, constantly meeting the highest quality standards of the sector. On the other hand, thanks to the experience acquired since 1940, Indar offers a wide range of wind generators developed from its own technology. The work carried out during this period has placed it in a leading position both in the Spanish and international markets. The presence of Indar generators stands out in the American market, as it is the only independent manufacturer with local production in the United States. To date, 3,500 generators have been supplied in the US, equivalent to more than 9 GW, and new platforms have been confirmed for the next few years. In addition, as part of the company's strategy, solutions are being developed to meet the demands of the Asian market. In the last year alone, Ingeteam's portfolio included the award and/or renewal of +4 GW in operation and maintenance contracts, with special mention of its growth in the United Kingdom, where the company has positioned itself as the leading independent service provider in the British market with almost 700 MW of renewable power maintained. Tue, 15 Jun 2021 10:28:00 GMT f1397696-738c-4295-afcd-943feb885714:3173 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3171/language/en-US/Ingeteam-will-equip-new-vehicles-for-Poland.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3171 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3171&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3171/language/en-US/Ingeteam-will-equip-new-vehicles-for-Poland.aspx Ingeteam will supply the electric traction systems for 12 locomotives and 8 EMUs. The traction equipment, designed and manufactured by Ingeteam, will be installed on trains operating in Poland. Ingeteam has obtained a new order for the supply of traction converters for 12 locomotives and 8 electric multiple units. The vehicles will be manufactured by PESA in Poland and will operate in that country. The contract includes the supply of high powered traction converters INGETRAC, located on board for the locomotives and medium powered converters located on the roof for the EMUs. So far, INGETEAM has supplied traction converters for more than 30 locomotives of this type. Deliveries of this new order have started in May. The converters will be manufactured at Ingeteam plant in Ortuella (Bizkaia), which was inaugurated at the end of 2019 and is now at full capacity. For the locomotives, INGETEAM will also supply the TCMS system. Mon, 14 Jun 2021 08:50:00 GMT f1397696-738c-4295-afcd-943feb885714:3171 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3162/language/en-US/Ingeteam-ha-sviluppato-un-nuovo-caricabatterie-domestico-per-veicoli-elettrici-per-lItalia-e-la-Francia.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3162 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3162&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3162/language/en-US/Ingeteam-ha-sviluppato-un-nuovo-caricabatterie-domestico-per-veicoli-elettrici-per-lItalia-e-la-Francia.aspx Ingeteam ha firmato un accordo con Veltium per la distribuzione di una nuova wallbox per la ricarica domestica di veicoli elettrici, che sarà commercializzata in Italia e Francia. Questa nuova soluzione di ricarica, denominata NEO, entrerà a far parte della nostra gamma, insieme alle altre stazioni di ricarica AC e DC per ambienti pubblici e privati. Ingeteam, intende soddisfare le esigenze di ricarica negli ambienti residenziali, dalle case unifamiliari alle installazioni condominiali, attraverso diverse opzioni di alimentazione e connettività. NEO avrà una serie di accessori dedicati per consentire, tra le altre cose, il bilanciamento della ricarica del veicolo elettrico con gli altri carichi domestici, il tutto facilmente gestito tramite l’App gratuita dedicata. La nuova wallbox Ingeteam è un’apparecchiatura intelligente che rende la ricarica un processo semplice e conveniente per l'utente finale, consentendogli di ottimizzare il consumo di energia e risparmiare sulla bolletta elettrica. Thu, 20 May 2021 06:08:00 GMT f1397696-738c-4295-afcd-943feb885714:3162 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3160/language/en-US/Ingeteam-is-developing-a-new-EV-home-charger-for-Italy-and-France.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3160 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3160&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3160/language/en-US/Ingeteam-is-developing-a-new-EV-home-charger-for-Italy-and-France.aspx Ingeteam has signed an agreement with Veltium for the distribution of a new home charger for electric vehicles, which is to be marketed in Italy and France. Named NEO, this new charging solution will become part of our range, which already includes AC and DC chargers designed for installation in both public and private locations. Ingeteam aims to cater for every use case existing in the residential sector, ranging from detached houses to collective installations in community garages, covering different power output and connectivity options. NEO will feature a range of its own accessories, designed to permit, among other things, load balancing between the electric vehicle and home, and all simply managed through an own App. The Ingeteam chargers will be smart enough to ensure that charging is a simple, convenient process for end users, while making it possible for them to optimize their energy consumption and to make savings in their electricity bills. Thu, 20 May 2021 06:02:00 GMT f1397696-738c-4295-afcd-943feb885714:3160 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3158/language/en-US/Talgo-awards-Ingeteam-the-contract-for-the-supply-of-the-Datalogger-systems-of-23-vehicles-for-the-operator-DB.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3158 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3158&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3158/language/en-US/Talgo-awards-Ingeteam-the-contract-for-the-supply-of-the-Datalogger-systems-of-23-vehicles-for-the-operator-DB.aspx Last April, the company Talgo awarded Ingeteam the contract to supply 414 Datalogger acquisition systems for 23 trains that will cover the international Berlin-Amsterdam route and that will be managed by the German operator DB. The INGESYS IC2 Datalogger solution to be supplied by Ingeteam is based on an acquisition hardware with EN50155 and EN45545-2 railway standards that captures vibration signals in the tracks of both the 17 cars and the locomotives of each of the 23 vehicles in order to improve the comfort on the train. Through SFTP, the INGESYS IC2 Datalogger solution will send the critical information to the Cloud from where it will be analysed by Talgo's maintenance staff.   Leire de Olabarria | Automation Devices Commercial Director Wed, 19 May 2021 08:33:00 GMT f1397696-738c-4295-afcd-943feb885714:3158 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3151/language/en-US/Mark-this-date-on-your-calendar-25-27-November.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3151 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3151&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3151/language/en-US/Mark-this-date-on-your-calendar-25-27-November.aspx Since the announcement of a worldwide pandemic in March of last year, companies have been living in constant uncertainty: cancelled trips, events postponed until unknown dates, continuous changes in strategies, etc. Ingeteam has gone through the same and we have had to adapt to this new situation as best as possible. Last year we saw how all our events were postponed, and then postponed again, or cancelled in the worst cases.  Fortunately, things have started to return to “normal” and we are beginning to see the light at the end of the tunnel.  Now we can tell you that we finally have a date for our first in-person event! . This will be the railway sector trade show Eurasia Rail, which will take place on 25 to 27 November in Istanbul (Turkey) where we will participate for the second time with our own stand and present our range of products for Railway Control and Monitoring. Eurasia Rail is one of the largest railway sector exhibits in the world.  This biannual event is attended by rolling stock manufacturers, suppliers of infrastructure technology and railway logistics companies from all over the world. It is a key international trade platform to connect industry giants with visitors under the same roof. We are looking forward to showing you our best and most complete range of railway automation solutions with our best smile 😊. We’ll see you at Stand A542 (Hall A) of Eurasia Rail 2021 !! Izaskun Apraiz Elguezabal | Automation Devices Marketing Manager Thu, 06 May 2021 10:58:00 GMT f1397696-738c-4295-afcd-943feb885714:3151 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3145/language/en-US/Ingeteams-new-power-station-for-solar-plants-equipped-with-string-inverters.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3145 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3145&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3145/language/en-US/Ingeteams-new-power-station-for-solar-plants-equipped-with-string-inverters.aspx Ø  Ingeteam's new product, the INGECON SUN String Station, which can achieve a medium voltage power output of up to 6.4 MW, is supplied as a turnkey solution with all its devices mounted on the same Skid or metal platform. Ø  The first units have already been installed in various solar plants in Spain.   The new power station designed and manufactured by Ingeteam is directed at solar plants equipped with string inverters instead of central inverters. Specifically, this solution has been designed to be installed in combination with the INGECON SUN 160TL solar inverters made by Ingeteam with 1500 Vdc technology. The design of the string station seeks to facilitate as much as possible the installation work and field connection. This is why it is supplied as a turnkey solution, with all the devices pre-connected at the factory. Moreover, it can be transported by land or sea, as it can be mounted directly on a truck trailer or inside a 40-foot container, so that it can be delivered anywhere. A further advantage of this solution is its flexibility, given that it can hold from one to four AC combiner boxes, responsible for receiving all the AC cabling coming from the solar inverters. Therefore, the power output range of the string station can vary from 1.6 MW up to 6.4 MW, allowing Ingeteam to cater for all types of project sizes and layouts. In addition to the AC combiner boxes, the string station is also equipped with the LV/MV power transformer, transformer oil tank, medium voltage switchgear, auxiliary services panel and auxiliary services transformer, for maximum optimization of the available space. All these components are certified to IEC standards. The first string station units were manufactured in Spain and are now installed in various Spanish solar projects. This new product strengthens Ingeteam's scope of supply for the solar sector, to which the Group supplies many other products and services. Wed, 05 May 2021 11:00:00 GMT f1397696-738c-4295-afcd-943feb885714:3145 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3149/language/en-US/An-INGESYS-IC3-by-Ingeteam-conducts-the-orchestra-of-the-ORTZE-electrical-hybrid-vessel.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3149 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3149&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3149/language/en-US/An-INGESYS-IC3-by-Ingeteam-conducts-the-orchestra-of-the-ORTZE-electrical-hybrid-vessel.aspx An INGESYS IC3 PLC made by Ingeteam automatically coordinates and manages all the operating modes of the first fishing vessel in Euskadi and in Spain capable of navigating in pure zero-emissions electrical mode.  The INGESYS IC3 is the primary component of the automation, control and monitoring system of the ORTZE vessel, which will operate as a floating classroom for students from the Náutico Pesquero Blas High School of Lezo, a classroom where they will be able to practice with a hybrid motor that was only available on paper until now. The INGESYS IC3 communicates via a fieldbus with the various subsystems that comprise the vessel’s electrical and propulsion plant, among which are frequency converters, the battery-based energy storage system and the auxiliary diesel generator unit. It is also equipped with direct inputs/outputs and remote I/O units for the sensors installed in all the vessel’s auxiliary services.   Functional diagram of the Ortze vessel The functions performed by the INGESYS IC3 to govern the vessel are as follows, among others: Automatic management and reconfiguration of the vessel’s operating modes (Solely electric, Diesel-Electric, Hybrid, Shore, Battery recharge) via control and command of the frequency converters and automatic breakers in the electrical plant. Power Management System or PMS function, by which the INGESYS IC3 calculates the power limits to apply to the propulsion and service subsystems, depending on the power available in the generation and storage plant. Energy Management System or EMS function, by which the INGESYS IC3 establishes energy strategies according to the energy available in the batteries and the mission or operation being performed by the vessel. Automatic control and command of all the vessel’s auxiliary services: salt and fresh water pumps, extractors, cooling systems, fuel pumps, etc. Centralised alarm management of all the vessel’s systems on the bridge. Communication with the central SCADA system on the bridge to monitor all the vessel’s variables in real time in synoptic fashion to assist in controlling the electrical plant and its maintenance. With a total of approximately 1300 processed inputs/outputs (150 are direct and 1150 are communication inputs/outputs with the frequency converters, batteries and Genset), the INGESYS IC3 is an essential mainstay for the functioning and operation of the ORTZE vessel, which combined with the rest of the vessel’s components, forms a breakthrough technological solution for a vessel of these characteristics. The modernisation of the vessel has been carried out through the installation of a new propulsion system based on a hybrid power plant, developed at the Basque company's facilities in Zamudio and Beasain. Specifically, at its Biscayan plant, Ingeteam has developed the power electronics converters and the control systems that propel the new training ship, including the battery storage system and the intelligent management of the energy on board. And in the factory of Guipuzcoa, Indar, the Ingeteam Group has developed the energy-efficient, compact, low-noise permanent magnet electric motor, which drives the ship's main propulsion propeller. Jose Luis Almeida | Project Engineer, Automation Systems, Projects Development Dept. Wed, 05 May 2021 09:47:00 GMT f1397696-738c-4295-afcd-943feb885714:3149 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3150/language/en-US/Ingeteam-wins-the-contract-for-the-Galley-control-systems-for-33-Hitachi-vehicles.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3150 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3150&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3150/language/en-US/Ingeteam-wins-the-contract-for-the-Galley-control-systems-for-33-Hitachi-vehicles.aspx Last March, Ingeteam received the contract for the Galley control systems for a fleet of 33 Hitachi vehicles. The long/medium distance trains operate on the East Midland Rail line in the United Kingdom (London/Manchester/Leeds) under the operator Abellio. The route of the fleet can be viewed below. For this project, the Ingeteam company will supply the control systems based on the INGESYS IC2 solution. INGESYS IC2 systems fulfil a dual function in this project: The distribution of energy to the various components found in the Galley, such as coffee makers, water heaters, microwaves, lighting, etc. This also includes control of compression equipment, fans and cold circuit valves used for chillers. Leire de Olabarria | Automation Devices Commercial Director Tue, 04 May 2021 10:36:00 GMT f1397696-738c-4295-afcd-943feb885714:3150 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3142/language/en-US/World-Day-for-Safety-and-Health-at-Work.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3142 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3142&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3142/language/en-US/World-Day-for-Safety-and-Health-at-Work.aspx At Ingeteam people come first. The most important thing in life is health. The only way to care for our people is to start from the most basic necessities of life: health and safety. I am sure that we all feel the same way and strive to protect those closest to us at home and in our families. It is that same spirit that drives us to raise the bar in regard to prevention in the "Ingeteam family". It is only by putting our health and safety first that we can always be sure of making the right decisions. When the priorities are clear, decision-making becomes much easier. So let's keep working together to raise the bar on health and safety! I'm in. Are you? Adolfo Rebollo – CEO of the Ingeteam Group To mark today, 28 April, as World Day for Safety and Health at Work, our CEO is sending this message to maintain and indeed enhance if possible the Ingeteam Group's commitment, launched in 2019 by the senior management team and aimed at the Group's workforce and stakeholders via the “LET´S GO SAFETY – LET´S BE HEALTHY”, ¨At work, you come first¨ campaign.  This campaign forms part of the strategy plan for 2019-2021 and comprises numerous schemes to raise awareness and skills and enhance our operations and systems for risk prevention. The aim is to consolidate an ever more robust, more far-reaching culture of health and safety and ensure that it is taken on board by the whole workforce. Such a culture entails greater awareness of risks, an increase in risk prevention efforts, an attitude of mutual care among fellow workers and enhanced teamwork. Wed, 28 Apr 2021 06:01:00 GMT f1397696-738c-4295-afcd-943feb885714:3142 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3140/language/en-US/Complete-traction-system-for-high-speed-vehicle.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3140 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3140&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3140/language/en-US/Complete-traction-system-for-high-speed-vehicle.aspx How do we manage a challenging  project ? A team of experts in different areas and the power and control technologies developed by INGETEAM have been key. The video shows the details on how we have designed , validated and supplied the traction system for the High Speed vehicle AVRIL , manufactured by TALGO. The vehicle goes through dynamic tests right now.  https://youtu.be/5UUxOZ5gZ8k Design. Availability and energy efficency , together with other requirements are the key to design the traction chain, who is composed by 2 traction converters, 1 transformer and 4 traction motors on every power head. INGETRAC traction converter is configurated through the optimal configuration of high powered modules, featuring latest power and control techolologies developed by INGETEAM. Manufacturing. INGETEAM supplies  state-of-the-art converters for railways traction  manufactured on a new production plant, with the latest production p`rocesses and quality tests.  Equipment Validation and Traction System Test. We validate each critical component on our laboratory, to guarantee design requirements accomplishment. We also test, on our own felectromobility laboratory, the complete traction system, simulating the operation real conditions, We will also certify the standards accomplishment (IEC). Assembly and commissioning. We assembly and verify the equipment installation . During the final phase of commissioning we will give support during the dynamic testing that will assure the security ans fonctionalities of the vehicle.  Get to know how we manage complex projects and get in touch with us! Tue, 27 Apr 2021 09:31:00 GMT f1397696-738c-4295-afcd-943feb885714:3140 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3129/language/en-US/Ingeteam-introduces-a-new-robust-wind-controller-firmware-development-methodology.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3129 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3129&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3129/language/en-US/Ingeteam-introduces-a-new-robust-wind-controller-firmware-development-methodology.aspx Ingeteam, the global specialist in wind energy drivetrain technology, announces that its firmware development methodology has been shown to significantly reduce the critical on-site validation and certification phase thanks to its robust qualification process. This speeds up the time to market and commercial production capacity of new wind farm developments whilst ensuring the highest level of reliability in the field. Tue, 06 Apr 2021 09:00:00 GMT f1397696-738c-4295-afcd-943feb885714:3129 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3127/language/en-US/Ingeteam-strengthens-its-international-expansion-with-the-opening-of-a-subsidiary-in-Vietnam.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3127 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3127&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3127/language/en-US/Ingeteam-strengthens-its-international-expansion-with-the-opening-of-a-subsidiary-in-Vietnam.aspx Ingeteam is consolidating its internationalisation plan with the opening of a new subsidiary in Vietnam, a fast-growing market that also provides access to neighbouring countries. Thereby, the company strengthens its global positioning with a presence in 24 countries. Located in the city of Hanoi, the subsidiary is dedicated to hydropower, off-grid and generation plants, from where Ingeteam will also serve markets such as Laos and Cambodia. Ingeteam currently has four orders on its books, three in Vietnam and one in Laos. These are orders for hydroelectric power plants, including their entire electrical and control systems. One of the power plants in Vietnam includes the plant's 115 kV substation as well as a bay at an existing substation. The Laos plant also includes a 220 kV substation. Indar, Ingeteam Group also has important references in the country’s hydroelectric sector, which it has supplied for several projects with over 20 generators totalling an installed capacity of 275 MVA in Vietnam and Laos. It is also worth noting that last year Ingeteam completed and delivered its first order for the solar sector in Vietnam, which consisted of the supply of 126 solar inverters in 42 power stations of 5 MW each, as well as the engineering and supply of a 220 kV substation, PPC power plant control system and SCADA monitoring system for a 240 MW photovoltaic plant. Furthermore, this country also has 9 high voltage electrical substations operating with Ingeteam's protection, control and automation system, with more than 300 Smart Electronic Devices supplied since 2013. The Asian market is also strategic for Indar's submersible pump and motor products, where significant growth is expected in the sector. Thu, 25 Mar 2021 13:56:00 GMT f1397696-738c-4295-afcd-943feb885714:3127 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3123/language/en-US/Ingeteams-new-power-station-for-large-scale-solar-plants-and-battery-storage-systems.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3123 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3123&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3123/language/en-US/Ingeteams-new-power-station-for-large-scale-solar-plants-and-battery-storage-systems.aspx Ø  The new INGECON SUN FSK product reaches 7.2 MW of medium voltage output power and is supplied as an all-in-one solution, since all the elements are placed on a full skid platform. Ø  The first units are already being installed in various photovoltaic plants.   Pamplona, Spain. 11th of March, 2021. Ingeteam has designed its new INGECON SUN FSK power station aimed at large-scale solar plants and battery energy storage systems, since its nominal power allows it to reach 7.2 MW of medium-voltage output power. This new design has been thought to make installation and connection work in the field as easy as possible. For this reason, it is supplied with all the elements previously connected at the factory. In addition, this solution can be transported both by land and by sea, since it can be placed directly on the trailer of a truck or inside a 40-foot container, allowing it to be installed anywhere in the world. The first units of this full skid type power station have been manufactured in Navarre, Spain, and are already being supplied to various photovoltaic projects. Flexibility is another advantage of this solution, since it can integrate from one to four solar or battery inverters (1500 Vdc or 1000 Vdc), so its output power range varies from 1 MW to 7.2 MW, which allows Ingeteam to adapt to all types of project configurations and sizes. Apart from the inverters, this power station also integrates the LV/MV power transformer, the transformer oil tank, the medium voltage switchgear, the auxiliary services panel and the auxiliary services transformer, thus optimizing as much as possible the use of the available space. This product reinforces Ingeteam's scope of supply for the solar sector and the energy storage sector, for which the Group supplies many other products and services. Thu, 11 Mar 2021 15:43:00 GMT f1397696-738c-4295-afcd-943feb885714:3123 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3111/language/en-US/Ingeteam-receives-a-new-order-to-automate-the-secondary-distribution-network-in-Thailand.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3111 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3111&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3111/language/en-US/Ingeteam-receives-a-new-order-to-automate-the-secondary-distribution-network-in-Thailand.aspx Ingeteam has received a new order for the supply of 45 smart remote INGEPAC™ DA AUC to be installed in compact 22 kV substations on the secondary distribution network in Korat (Nakhon Ratchasima), Thailand. INGEPAC™ DA AUC equipment is fully programmable and includes modular hardware to implement all RMU and compact installation automation, metering, and remote control requirements in a single system. Applications: RTU for SCADA communications over DNP3 SA protocol RMU signal monitoring Integration of existing meter over Modbus RTU protocol Remote automation and switching locks Event recording Local control and signalling Contact our representative office in Bangkok for further information on our products and solutions: Thailand.PGA@ingeteam.com Mon, 22 Feb 2021 09:00:00 GMT f1397696-738c-4295-afcd-943feb885714:3111 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3109/language/en-US/Ingeteam-is-working-on-developing-a-fully-digitised-substation-automation-solution.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3109 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3109&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3109/language/en-US/Ingeteam-is-working-on-developing-a-fully-digitised-substation-automation-solution.aspx The digital transformation in the energy sector, traditionally seen as the future direction in which to aim innovation and development, is now a reality for projects seeking to include long-lasting technology. This transformation is contributing not only towards more profitable operations but also to an increase in availability, reliability and sustainability throughout the entire energy supply. One of the main assets within the energy supply process are substations, which are critical infrastructures for the electricity grid to foster the development of our society. Ingeteam is currently developing the DIGITAS project, co-funded by the Basque Government and the European Union using FEDER funds through the Hazitek programme. The main goal of this project is to develop a fully digitised substation automation solution ready for operations in which data access allows for services in addition to automatic plant operations to be generated. A digital substation is one in which most of the data related to the primary process (measurements from sensors, digital inputs, etc.) are instantly digitised at the point where it is collected. From then on, this data is exchanged between the devices at the substation and the different system operators over the different communications networks, normally via Ethernet connection. Inside the substation, digitisation also simplifies the installation, as it rules out the need for a large part of the physical cables that exist in a conventional substation. Ingeteam is developing new functions in protection and control equipment, in substation control units (SCU) and in local HMIs. It is also creating remote configuration, monitoring and access tools for easier maintenance. One of its main goals is for the equipment configuration process deployed to be as automatic as possible in order to reduce human error and speed up the deployment processes to spend less man-hours on the engineering and commissioning stages. The solution uses different international standards that make interoperability inside the substation and to the exterior possible, considering the cybersecurity needs of systems with remote access. Ingeteam has supplied over 100,000 items of protection and control equipment for substations. Thu, 18 Feb 2021 09:00:00 GMT f1397696-738c-4295-afcd-943feb885714:3109 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3099/language/en-US/Santa-Barbara-Pacific-Water-on-Tap-With-Indar-Submersible-Pumps.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3099 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3099&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3099/language/en-US/Santa-Barbara-Pacific-Water-on-Tap-With-Indar-Submersible-Pumps.aspx Indar is delighted to announce that will be supplying the new submersible pump for the screened open ocean intake. Manufactured in Duplex Material, and customized for the actual needs of the plant, this high-efficient customized motor-pump solution, for the Charles E. Meyer Desalination Plant, will pump the seawater from the intake offshore in the Pacific Ocean to the desalination plant. Starting in 2017, Santa Barbara`s  Charles E. Meyer Desalination Plant produces three million gallons of drinking water per day. This is equivalent to 3,125 acre-feet of water annually or about 30 percent of the City’s demand. The City of Santa Barbara constructed their seawater desalination plant as an emergency supply in response to a severe drought that depleted the City's available water resources. The desalination plant is an important part of the City’s water supply portfolio which also includes surface water from Cachuma and Gibraltar reservoirs, groundwater, State water, purchased water, recycled water, and conservation. Santa Barbara`s  Charles E. Meyer Desalination Plant Desalination Plant is operated by @IDE Technologies. Wed, 10 Feb 2021 08:07:00 GMT f1397696-738c-4295-afcd-943feb885714:3099 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3096/language/en-US/Ingeteam-strengthens-its-technology-platforms-to-rise-to-the-wind-market-future-challenges.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3096 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3096&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3096/language/en-US/Ingeteam-strengthens-its-technology-platforms-to-rise-to-the-wind-market-future-challenges.aspx Ingeteam, the global specialist in wind energy drivetrain technology, announced that it has successfully secured framework contracts with key clients for the serial supply of its latest technology developments, including its new high power DFIG converters, as well as low and medium voltage full power converters. These agreements will secure the manufacture and supply of new generation and conversion equipment across its manufacturing plants in 2021 and beyond. Tue, 09 Feb 2021 10:00:00 GMT f1397696-738c-4295-afcd-943feb885714:3096 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3107/language/en-US/Ingeteam-launches-a-new-after-sales-service-in-Mexico.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3107 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3107&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3107/language/en-US/Ingeteam-launches-a-new-after-sales-service-in-Mexico.aspx Ingeteam, world leader in the design and manufacture of substation protection and electricity grid digitisation equipment, now has a new after-sales and technical support service in Mexico, a country where it has gone from strength to strength over recent years as a benchmark in the renewable energies sector. The new service will enable Ingeteam to guarantee a higher quality, fast and effective response to its clients’ incidents, adapted to the specific needs of this market. With over 6000 automated substations worldwide, Ingeteam is the supplier of protection and control IEDs for the state-owned electric utility of Mexico, Comisión Federal de Electricidad (CFE), providing more than 500 pieces of equipment over the past year in the Transmission and Distribution segments. The company products are approved by the equipment and material testing laboratory, Laboratorio de Pruebas de Equipos y Materiales (LAPEM), the body responsible for providing technical support to the CFE regarding the generating, transmission and distribution of electricity. Ingeteam PGA has established an after-sales protocol for HW incidents, keeping the client informed at all times as to the status of the incident. All complaint reports will be recorded in a database for full product traceability. To contact the new service, simply call +52 5518820419 and +52 5580711896 or send an e-mail to support.pgamx@ingeteam.com. Ingeteam in Mexico As well as the aforementioned subsidiary in Mexico City, the Ingeteam Group has offices in Juchitán de Zaragoza and San Luis Potosí, both dealing in the supply of O&M services in wind farms and photovoltaic plants. It also has a subsidiary in Monterrey that specialises in the sale of photovoltaic inverters. All in all, this adds up to over 400 professionals. Since its arrival in the Latin American country in 1998, Ingeteam has continued to accumulate projects to become one of the main companies in the renewable energies industry, in both the wind and the photovoltaic sector, with over 4 GW of renewable power integrated into the electricity grid through substations automated by its systems. For further information on Ingeteam PGA technology for the automation of substations and electrical distribution grids, download the catalogue of products. Mon, 08 Feb 2021 09:00:00 GMT f1397696-738c-4295-afcd-943feb885714:3107 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3090/language/en-US/Ingeteam-applies-AI-to-its-converters.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3090 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3090&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3090/language/en-US/Ingeteam-applies-AI-to-its-converters.aspx -  This development has emerged from the company's continual efforts in R&D, which have led it to take part in BIND 4.0 as a trailblazing company. -  Data analysis via AI algorithms can be applied to various sectors in which Ingeteam operates, including wind & solar energy, shipbuilding, drive systems, etc. Ingeteam is to set up a project to apply AI to the converters that it manufactures. Initially, artificial intelligence will be used in the data captured by the converters that the company makes for wind turbines, but it may then be extended to other sectors of operation such as PV solar, shipbuilding, railway drive systems, etc. This development has emerged from the company's continual efforts in R&D, which have led it to take part in BIND 4.0 as a trailblazing company. BIND 4.0 is an open public/private innovation platform for smart industry created by the Basque Government Department of Economic Development, Sustainability and the Environment through the SPRI Group and its UpEuskadi platform to promote the entrepreneurial ecosystem of the Basque Country. Under the cooperation arrangements fostered by the programme, the company has selected a start-up specialising in AI applications with which to work on the project. Data analysis via AI algorithms in converters can be used in preventive maintenance, the sizing of components, calculating operational limits, performance of equipment under given conditions, stress capacity, development over the year, performance depending on geographical location, etc. Thu, 28 Jan 2021 08:22:00 GMT f1397696-738c-4295-afcd-943feb885714:3090 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3085/language/en-US/Ingeteam-supplies-its-technology-to-a-160-MW-solar-PV-plant-in-Sacramento-County-California.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3085 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3085&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3085/language/en-US/Ingeteam-supplies-its-technology-to-a-160-MW-solar-PV-plant-in-Sacramento-County-California.aspx Ø  The Rancho Seco II solar plant is located on the premises of the decommissioned Rancho Seco nuclear power plant. Ø  This solar plant is the largest fixed-tilt photovoltaic project in Sacramento County, California.   Ingeteam Inc. Milwaukee, WI. January 25th, 2021. Ingeteam Inc has supplied and commissioned 53 of its solar PV power stations for the 160 MW Rancho Seco II solar plant. This photovoltaic facility, built by Rosendin Electric for DE Shaw Renewable Investments, is the largest fixed-tilt solar plant in Sacramento County, CA. It was commissioned by the end of 2020. “We are proud and appreciative for the opportunity to partner with Rosendin Electric to supply our fully integrated medium voltage power stations for this landmark project with DE Shaw”, said Nohra Nasr, Vice President and General Manager of Solar PV and BESS at Ingeteam Inc. “This is another milestone for Ingeteam which boasts our commitment to serve and support the solar and energy storage sector in the US and worldwide. Our proven technology and performance track record in delivering, commissioning, and servicing our product to dozens of significantly large utility-scale projects continue to feed our confidence to be ready for any challenge”. The solar PV plant has been built on the premises of the decommissioned Rancho Seco nuclear power plant, that stopped its operations in 1989. Ingeteam’s power station is a complete plug-and-play solution that is supplied on a turnkey basis for immediate connection on site. Each power station integrates a 3.38 MW solar inverter, a LV panel, an auxiliary services transformer and a MV padmounted transformer. The local utility will buy the energy generated at the Rancho Seco solar PV plant through a long-term power purchase agreement (PPA). Scope of supply 53 power stations fitted with all the necessary equipment to inject medium voltage power: solar PV inverter, LV/MV padmounted transformer, auxiliary services transformer and low voltage switchgear. 53 units of the DUAL INGECON® SUN 1690TL U B650 photovoltaic inverters, each with a rated output power of 3.38 MW. These inverters feature 1500 Vdc technology, DC string monitoring and an AC pre-charge system for injecting up to 100% reactive power at night. Solar PV plant commissioning. Technical training. Mon, 25 Jan 2021 16:15:00 GMT f1397696-738c-4295-afcd-943feb885714:3085 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3080/language/en-US/Ingeteam-consolidates-its-position-in-OM-and-achieves-100-percent-in-the-United-Kingdom.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3080 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3080&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3080/language/en-US/Ingeteam-consolidates-its-position-in-OM-and-achieves-100-percent-in-the-United-Kingdom.aspx - Ingeteam, in just one year, has doubled the power it maintains in the United Kingdom, moving up to 650 MW, which is equivalent to the annual energy consumption of 442,867 households. - This strong growth has led the company to double its staff in the United Kingdom. - It has recently won a new contract for the supply of a storage solution for the National Grid operator. For Ingeteam, 2020 has been the year in which the company has strengthened its renewables business in the United Kingdom, winning contracts that have allowed it to double its maintained power in as little as a year, moving up to 650 MW.  Specifically, and by technologies, Ingeteam is providing O&M services for 380MW of installed capacity in the wind sector and 270MW in the PV sector in the United Kingdom. This maintained power is equivalent to the annual energy consumption of 442,867 households. This strong growth has led the company to double its staff in the United Kingdom and it has also recently opened new offices in Glasgow, where one hundred employees are now working.   Since its arrival in the United Kingdom in 2015, the company has strengthened its position in the O&M sector, to become a trusted option for the maintenance of renewable energy plants in this country. Ingeteam currently has a 2% market share in the British market. Ingeteam has strengthened its international positioning in the Operation & Maintenance sector and it´s leadership in Europe. On a global level,has increased its maintained power in relation to 2019 by 4 GW, a figure which places its global portfolio at 16 GW. By sectors, the maintained power in the wind power sector is 9.2 GW and in the PV sector, the figure has grown until 7.5 GW. In addition, Ingeteam has experienced significant development in the market in biomass plants, where it currently maintains a total of 60 MW. This week, Ingeteam has been awarded a contract for the construction of a 5 MW energy storage solution based on supercapacitors, a pioneering solution in the United Kingdom. This equipment will make it possible for the National Grid, the electricity system operator in the UK (equivalent to the Spanish REE) to get accurate real-time localized information on inertia. These measurements will then be used to make the necessary decisions with regard to the sizing and location of any auxiliary systems required to maintain the stability of the energy system. As more renewables come onto the grid and as conventional power stations close, there is a growing need to find new ways of providing inertia. This project will make it possible to do so in a way that adapts to the actual requirements of the grid. Another key highlight is that Ingeteam is to supply one of the largest battery storage systems in the world to Scottish Power Renewables, Iberdrola's subsidiary in the United Kingdom. The project will act as a back-up to the largest onshore wind farm in the United Kingdom, at Whitelee, near Glasgow, and will have a storage capacity of 50 million watt hour, equivalent to the average consumption of 150,000 households/hour. Tue, 12 Jan 2021 14:14:00 GMT f1397696-738c-4295-afcd-943feb885714:3080 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3103/language/en-US/Ingeteam-commissions-32-protection-and-control-systems-in-Brazil.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3103 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3103&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3103/language/en-US/Ingeteam-commissions-32-protection-and-control-systems-in-Brazil.aspx At the end of 2020, through the business unit Power Grid Automation in Brazil, Ingeteam successfully supplied 32 digital protection and control systems installed in electrical substations owned by Neoenergia / Elektro. The solution provided for these substations is based on the INGEPAC™ EF product range of protection and control equipment, with a fully native platform under the IEC 61850 standard. Using the high logic programming capacity of the IEDs, of particular note are the different automation devices developed for the project. Furthermore, interoperability and horizontal communications are guaranteed through GOOSE messages implemented using third-party equipment. The success of the work has allowed Ingeteam to secure a new contract in 2021 for the supply of complete digital protection and control systems, this time involving all Neoenergia distributors in Brazil. For enquiries and further information on equipment and services offered, please contact Ingeteam at grids.ingeteamltda@ingeteam.com. Tue, 12 Jan 2021 09:00:00 GMT f1397696-738c-4295-afcd-943feb885714:3103 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3078/language/en-US/Ingeteam-exceeds-2-GW-of-solar-power-supplied-to-Australia-and-achieves-its-first-OM-contract.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3078 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3078&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3078/language/en-US/Ingeteam-exceeds-2-GW-of-solar-power-supplied-to-Australia-and-achieves-its-first-OM-contract.aspx -  Recently, the company has landed in Australia with its Service division, providing and added value to Ingeteam’s power conversion products for the Australian market. -  Thanks to the good figures obtained in 2020 in the Australian market, the Spanish company has now exceeded 2 GW of solar PV power awarded for this country. Ingeteam has passed the 2 GW (2,000 MW) mark for solar power supplied as PV inverters for the Australian market. This figure was achieved thanks to the 753 MW awarded to the company in 2020 in eight photovoltaic projects in which its Inverter Stations have been or are being installed, as well as other Ingeteam products and services. Specifically, the total solar power awarded to Ingeteam in Australia already amounts to 2,096 MW. An important milestone for the company that is strengthened with the arrival to the Australian market of Ingeteam Service, the company’s operation and maintenance division. As a market leader in the supply of O&M services for energy generation plants, Ingeteam Service has landed in Australia with a first contract to provide O&M services to two solar PV power plants with power ratings of 85 MW and 75 MW, that were commissioned in December 2017. Juan Miguel Gutiérrez, the director of Ingeteam Australia Pty Ltd., stated that the 2 GW of power "is a nice, round number, but the important thing is that it reaffirms the confidence that our customers are placing in our solutions, in a market in which the technical requirements demanded by the power companies and grid operator are probably the toughest in the world". The figure achieved by Ingeteam in Australia has secured the company's position in the country, where it has been present since 2013 and currently boasts the second largest market share in the PV inverter manufacturer ranking. Juan Miguel Gutiérrez also added that "our customers highly value the fact that Ingeteam is able to offer a complete package of products and services, which not only includes the PV inverters and transformer substations with all the low and medium voltage equipment, but also the power plant controller (PPC) system, the SCADA, the equipment commissioning work and the operation and maintenance service". Thu, 07 Jan 2021 10:24:00 GMT f1397696-738c-4295-afcd-943feb885714:3078 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3053/language/en-US/Commissioning-of-the-second-Grayson-Thermal-Systems-BTMS-Battery-Thermal-Management-System.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3053 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3053&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3053/language/en-US/Commissioning-of-the-second-Grayson-Thermal-Systems-BTMS-Battery-Thermal-Management-System.aspx The Engineering Department of the Automation Devices Unit has undertaken the commissioning of a second BTMS (Battery Thermal Management System) together with Grayson Thermal Systems. Ingeteam has undertaken the programming of the INGESYS IC2 control equipment for the correct functioning of the system based on the client's specifications. The BTMS is responsible for controlling the temperature of the train's batteries, activating the cooling circuit pump together with the cooling and heating systems depending on the needs of the system at any given moment and based on the setpoint received from the TCMS via the main CAN communications bus. Another point worthy of mention is that following the completion of the commissioning the client has successfully completed the EMC certification of the entire system which is required for its subsequent installation on the train. Mikel Concha | Engineering Director Wed, 02 Dec 2020 11:37:00 GMT f1397696-738c-4295-afcd-943feb885714:3053 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3070/language/en-US/Ingeteam-leads-on-technology-and-innovation-at-the-Hamburg-WindEnergy-Event.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3070 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3070&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3070/language/en-US/Ingeteam-leads-on-technology-and-innovation-at-the-Hamburg-WindEnergy-Event.aspx We are is proud to be the Technology & Innovation Partner at the first ever digital WindEnergy Hamburg and the international WindEurope conference that will be streamed on WindTV from 1-4 December. A commitment well aligned with our company’s steady track-record of continuous innovation, backed by industry-leading R&D investment levels. WindTV will offer Insights and news from industry insiders and major policymakers directly on your screen, whether live or on-demand. Tue, 01 Dec 2020 09:30:00 GMT f1397696-738c-4295-afcd-943feb885714:3070 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3068/language/en-US/Ingeteam-Group-has-been-granted-a-contract-with-the-CSBC-Corporation-Taiwan-as-the-electrical-system-integrator-of-the-very-first-Taiwanese-built-offshore-wind-installation-vessel.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3068 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3068&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3068/language/en-US/Ingeteam-Group-has-been-granted-a-contract-with-the-CSBC-Corporation-Taiwan-as-the-electrical-system-integrator-of-the-very-first-Taiwanese-built-offshore-wind-installation-vessel.aspx Ingeteam was selected as the electrical system integrator for the new project of CSBC-DEME Wind Engineering (CDWE) of the very first floating heavy lift and installation vessel named “Green Jade” to be built in Taiwan for deployment for both the Hai Long and Zhong Neng offshore wind farm projects. She is set to be delivered in 2022. The name “Green Jade” symbolises Taiwan’s renowned Yushan, the Jade Mountain. At a dizzying height of 3,952 m above sea level, Jade Mountain is the highest peak in East Asia and gives Taiwan one of the highest elevations of any island in the world. Additionally, the name ‘Green Jade’ reflects this trail-blazing vessel’s contribution to reducing emissions, and its role in bringing clean, green energy to Taiwan’s residents. By choosing such an auspicious name, CDWE wants to highlight the ambitions to develop the offshore wind industry and to successfully ‘scale the summit’ together. This exceptional vessel highlights CDWE’s ambitions to further support development of the offshore wind industry in Taiwan and the wider Asia Pacific region. Green Jade will feature a high-tech, 4000-tonne capacity crane and DP3 capability. The vessel’s deck space has been maximised, enabling this unique asset to transport a multitude of the heaviest monopiles, jackets, wind turbine components and structures in a single shipment. With this exceptional combination of high load and lifting capacity, ‘Green Jade’ can transport and install the next generation of foundations and giant multi-megawatt wind turbines in the most cost-effective way. At 216.5 metres long, ‘Green Jade’ can comfortably accommodate a crew of up to 160 people. INGETEAM will coordinate and assure the correct design and integration of all electrical systems during the full project, from the early stages of the basic engineering to the detailed electrical engineering, including cabling commissioning and sea trials. The highlights of our scope of supply for electrical power system are: • 4 x INDAR Generators  11450kVA, 11000V, 600rpm • 2 x 11000V Main switchboard • 1 x INGESHIP PMS (Power management system) including Advanced Generator Protection System • 4 x Main propulsion frequency converters, INGEDRIVE LV400 • 4 x INDAR Main propulsion motors, 4500kW • 2 x Retractable thruster frequency converters, INGEDRIVE LV400 • 2 x INDAR Retractable thruster motors, 4200kW • 2 x Bow thruster frequency converters, INGEDRIVE LV400 • 2 x INDAR Bow thruster motors, 2500kW • Transformers for Distribution, Main Propulsion, retractable thruster, bow thruster and crane systems • Auxiliary switchboards 690V, 440V and 230V INGESHIP AMS - Integrated Alarm and Monitoring System •PLC´s Network and HMI •INGESHIP-IAS , Integrated Alarm & Monitoring System (over 11 000 I/Os) •INGESHIP- RAS, Remote Access Service Ingeteam is proud to be part of this historical project for the Taiwanese offshore wind industry and we would like to express our gratitude to CSBC Corporation and CDWE for the trust in our experience in electrical systems integration.   Source: CDWE  Wed, 25 Nov 2020 10:32:00 GMT f1397696-738c-4295-afcd-943feb885714:3068 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3060/language/en-US/Iberdrola-and-Ingeteam-have-created-Iberlyzer-a-company-dedicated-to-the-electrolyser-plants.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3060 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3060&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3060/language/en-US/Iberdrola-and-Ingeteam-have-created-Iberlyzer-a-company-dedicated-to-the-electrolyser-plants.aspx Iberlyzer will begin operations next year and will integrate over 200 MW of electrolysers by 2023, investing €100 million to create 150 direct jobs The agreement strengthens Iberdrola and Fertiberia’s green hydrogen project to develop 800 MW – in four stages, totalling €1.8 billion investment – which would contribute to the development of the supply chain and the creation of nearly 4,000 jobs Iberdrola and the world's leading manufacturer of electrolysers, Nel – through Nel Hydrogen Electrolyser – have combined their capacities to turn Spain into a technological and industrial benchmark in green hydrogen. The companies have signed a Memorandum of Understanding (MoU) to develop and deploy large-scale electrolyser projects and promote the technology’s supply chain in Spain.In addition, and in order to deliver this project, Iberdrola and Basque company Ingeteam have created a new venture under the name of Iberlyzer, set to become Spain’s first integrator of large-scale electrolyser plants. Norwegian company Nel is the world's largest manufacturer of electrolysers with business operations in over 80 countries. It is a global company dedicated to hydrogen, offering optimal solutions for producing, storing and distributing hydrogen from renewable energy. Its roots date back to 1927 and its hydrogen solutions cover the entire value chain, from hydrogen production technologies to hydrogen fueling stations. Its shares are listed on the Oslo Stock Exchange. The new company will begin operations next year with the aim of integrating more than 200 MW of electrolysers by 2023. This output (representing over 50% of Spain’s electrolyser capacity target) would be destined for the second project of the Iberdrola-Fertiberia alliance, which will produce green hydrogen for the Palos de la Frontera plant in Spain. The Ingeteam Group, a global supplier to Iberdrola, specialises in electricity conversion, with operations all over the world and permanent operations in 24 countries, employing more than 4,000 people. The Iberlyzer industrial project will require close to €100 million investment and will create 150 direct skilled jobs. Ignacio Galán, Chairman and CEO of Iberdrola, said: “This initiative will accelerate the production of green hydrogen in Spain and will create a new industry, the manufacturing of electrolyser systems, with high growth potential. We continue to make progress in our ambitious plan to put Spain and Europe at the global forefront of this technology by reducing energy dependence and fossil fuel consumption while driving the country’s economic and social revitalisation.”  Jon André Løkke, CEO of Nel, said: "We are honored that Iberdrola wants to work more closely together with us on electrolyser projects in the 100-MW scale and beyond. Just as Iberdrola in the past successfully contributed to developments in the wind industry, they are now doing the same within hydrogen. Getting visibility on significant off-take volumes and working together on the value chain through scale-up will contribute massively to the overall cost reductions.”  Adolfo Rebollo, CEO of Ingeteam, said: "We are proud to participate with Iberdrola in this new and exciting project. From the very beginning we have worked together with Iberdrola in the field of renewable energy, first in wind energy, then in solar photovoltaics and from today, with the creation of Iberlyzer, we are at the forefront of developing the green hydrogen industry."  Iberdrola, green hydrogen technology and industry leader  Recently, Iberdrola and Fertiberia presented an innovation alliance to develop a four-stage, 800- MW green hydrogen production project at the Fertiberia plants in Puertollano (Ciudad Real) and Palos de la Frontera (Huelva) by 2027. The initiative represents an investment of €1,800 million over the next seven years and could turn Spain into a green-hydrogen industrial leader, and the first country with 100% of its ammonia production for fertilisers being completely green.  The green hydrogen production capacity under this plan would be equivalent to 20% of the national target (4GW installed capacity by 2030) and would ensure that around 25% of the hydrogen currently consumed by Spain would not generate any CO2 emissions. These projects would contribute to the development of the value chain, creating almost 4,000 skilled jobs – 2,000 of them already by 2023 –, through 500 local suppliers.  Being the result of a private-public partnership, the project is born with the same ambition that the Spanish Government has shown in its Green Hydrogen Roadmap and meets the EU recovery funds criteria, essential to the implementation of its last three phases.  Europe's largest industrial hydrogen complex  This innovation initiative was kicked-off with the launch of the largest green hydrogen complex for industrial use in Europe which will be operational in just one year in Puertollano (Ciudad Real), after an investment of €150 million. The project will consist of a 100-MW solar photovoltaic plant, a lithium-ion battery system with a storage capacity of 20 MWh and one of the largest systems for producing hydrogen by electrolysis (20 MW). Its development and construction will create 700 jobs and, once operational, will prevent the emission of 39,000 tCO2/year.  For this project, Iberdrola has selected the European company Nel Hydrogen Electrolyser -a division of Nel ASA- as its preferred supplier for the construction of the hydrogen production system using electrolysis.  Thu, 19 Nov 2020 06:55:00 GMT f1397696-738c-4295-afcd-943feb885714:3060 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3054/language/en-US/Ingeteam-has-been-awarded-the-Control-Systems-for-600-toilet-modules-for-50-Alstom-high-speed-trains.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3054 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3054&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3054/language/en-US/Ingeteam-has-been-awarded-the-Control-Systems-for-600-toilet-modules-for-50-Alstom-high-speed-trains.aspx Last July, Ingeteam Power Technology was awarded, via the company Rolen Technologies, the supply of the Control Systems for the toilet modules for 50 trains of Alstom's latest generation high-speed trains for the SNCF (“French National Railway Company”). Ingeteam will supply 600 INGESYS IC2 control systems meeting both hardware and software requirements (communications, cyber security and Alstom web server) to the company Rolen Technologies, the toilet modules manufacturer. The deliveries commenced last September and are estimated to extend over 2 years. Leire de Olabarria | Automation Devices Commercial Director Wed, 11 Nov 2020 12:23:00 GMT f1397696-738c-4295-afcd-943feb885714:3054 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3047/language/en-US/Ingeteam-is-awarded-an-important-contract-for-the-renewal-of-the-substation-remote-control-systems-of-Enel-Green-Power-Espana-S-L-for-the-next-3-years.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3047 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3047&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3047/language/en-US/Ingeteam-is-awarded-an-important-contract-for-the-renewal-of-the-substation-remote-control-systems-of-Enel-Green-Power-Espana-S-L-for-the-next-3-years.aspx The contract covers the need for Enel Green Power España (EGPE) to replace part of the Substation Control Units (SCU) and Local SCADA (HMI) in existing substations, due to the obsolescence of the equipment and the difficulty of ensuring maintainability of these in the absence of support. EGPE considers that the SCU are a critical element to ensure the operation of the evacuation substations of its renewable energy plants, which requires suppliers of reliable equipment, with proven reliability and committed to supporting the entire useful life of the plant – requirements that both Ingeteam and its SCU devices meet. The scope of the contract includes the equipment to replace existing SCU from other suppliers, as well as SCU / Local SCADA (HMI) configuration services, integration of existing protection and control equipment and communication with the EGPE control center in the IEC 60870-5-104 protocol. This scope will allow EGPE to have a real-time operation system for its substations, enabling the evacuation of the energy generated when the market requires it. This supply will increase up to 450 MW the generation capacity of EGPE evacuated through Ingeteam Control Systems, which reaches more than 25 GW worldwide. Wed, 11 Nov 2020 07:00:00 GMT f1397696-738c-4295-afcd-943feb885714:3047 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3055/language/en-US/New-INGESYS-IC2-P-processor-module.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=3055 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3055&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/3055/language/en-US/New-INGESYS-IC2-P-processor-module.aspx The INGESYS IC2 system incorporates a new processor module which is a comprehensive upgrade of the product. The new processor module, IC2-P, joins the currently available IC2-C/HC product range by adding calculating power and increased memory capacity, as well as a new range of software programming tools. The new processor module includes an 800Mhz dual-core processor, which increases performance by a factor of 4 to the current solution, and increases process memory by approximately 4 times. Two independent Ethernet interfaces are incorporated, and all the field buses which were already included in the current solution are maintained (CAN, RS232/485, MVB, RTSX, MODUBUS TCP/RTU, ETHERNET/IP etc.). The new processor likewise represents a revolution as regards its software, as there are now multiple programming options to be chosen by the user. It is possible to continue to opt for a Codesys-based control, updated to the new 3.5 version, but there is likewise available the option of programming directly in C/C++ thanks to the new INGESYS BSP, a library providing access to the system's resources (diagnostics, communications, I/O etc.) The new website, completely redesigned, now supports multi-platform client, thereby enabling access to diagnosis and monitoring from any device. Finally, the controller programming option via Matlab/Simulink is maintained, which is particularly useful for more complex control algorithms. In conclusion, this new processor module is a major upgrade for the INGESYS IC2 product family, which will enable the processor to be used in a wider range of applications in the energy, industrial or railway sectors. Eneko Fernández | HW Design Manager Mon, 09 Nov 2020 12:27:00 GMT f1397696-738c-4295-afcd-943feb885714:3055 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2660/language/en-US/Ingeteam-supplies-its-solar-inverters-for-a-PV-project-of-more-than-100MW-in-Chile.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=2660 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2660&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2660/language/en-US/Ingeteam-supplies-its-solar-inverters-for-a-PV-project-of-more-than-100MW-in-Chile.aspx Ø  Ingeteam has supplied 70 solar inverters for Naturgy's photovoltaic project in Chile. Ø  Over the next few months, Ingeteam is set to perform the commissioning work and will be responsible for providing the subsequent O&M services for this project with a power capacity of  more than 100 MW.   Ingeteam has supplied 70 PV inverters for a photovoltaic project that is being constructed in Chile, owned by Global Power Generation (GPG), the international power generation subsidiary of the Naturgy group. Over the next few months, the company is set to perform the commissioning work and will also be responsible for the provision of the operation and maintenance services at both plants, totaling a power capacity of more than 100 MW. This project comprises two plants, San Pedro I and San Pedro IV, with 48 MW and 60 MW respectively, located in the heart of the Atacama desert. Given that this is the most arid desert in the world, with harsh climatic conditions, this project has been a real technological challenge. For this project, Ingeteam has supplied 70 of its PV central inverters with 1500V technology and a rated power of 1690kW, housed in 18 Inverter Stations fitted with all the equipment required for low to medium voltage conversion. Furthermore, the Power Plant Controller (PPC) system for the management of all the solar inverters at both plants, was also supplied by Ingeteam.. With regard to the O&M services, this is a Full Service contract that includes LV, MV and HV electromechanical maintenance (including the substation and transmission line), the cleaning of modules, plant safety, 24x7 monitoring and reporting. Furthermore, the personnel responsible for this work will perform predictive, preventive, corrective maintenance work, activity reporting, warranty management, spares management and supply, drone thermography, etc. The Ingeteam supply For this project, Ingeteam has supplied: ·   70 central PV inverters with 1500V technology. The inverter model is the INGECON SUN 1690TL B650. ·   Sixteen 6.76MW Inverter Stations and two 5MW Inverter Stations, fitted with all the equipment required for low to medium voltage conversion  (transformer and MV switchgear, LV switchboard, auxiliary services, PV inverters, etc.). ·   INGECON SUN Power Plant Controller (PPC) system ·   Project commissioning. ·   General operation and maintenance of both plants. Ingeteam in Chile Since it first gained a foothold in this country in the Andes seven years ago, Ingeteam has supplied more than 1.5 GW in PV inverters, boasting an exceptional position in the solar inverter manufacturer ranking in Chile. The company has also supplied control and protection systems to the Chilean market for the grid connection of more than 1.8 GW of renewable energy in ten substations of wind power plants and nine substations of PV power plants. Furthermore, Ingeteam has secured its position as a leader in the operation and maintenance (O&M) of renewable energy generation plants. In Latin America, the company is responsible for the maintenance of a total of 3.3 GW. Specifically, in the solar sector in Chile, Ingeteam maintains 29% of the total renewable power installed in the country, a record figure that has been achieved primarily thanks to its presence in the Atacama desert. Tue, 03 Nov 2020 14:00:00 GMT f1397696-738c-4295-afcd-943feb885714:2660 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2657/language/en-US/Ingeteam-supplies-the-charging-stations-for-the-Nantes-Chamber-of-Commerce-in-France.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=2657 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2657&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2657/language/en-US/Ingeteam-supplies-the-charging-stations-for-the-Nantes-Chamber-of-Commerce-in-France.aspx o   The company Automobilité, heading the project, selected Ingeteam as the supplier of the electric vehicle charging stations. o   10 Ingerev FUSION charging stations have been installed, being the model that best met the project requirements. Ingeteam has supplied 10 EV semi-rapid charging stations for the Nantes Chamber of Commerce, situated in the Pays de Loire region of France. This project was awarded through a public tender organized by the Chamber of Commerce itself, for the installation of charging stations for its new fleet of electric vehicles. France has set itself the goal of reaching one million electric or hybrid cars by 2022, and the improvement of the charging point section is among the measures proposed.  The chargers made by Ingeteam met all the requirements established in the tender, given that they feature two charging points with a 22 kW power output and with wall and floor-mounted versions. Furthermore, they are accessible to the public and offer access control, power management and integrated protection. The ten stations, which allow for the simultaneous charging of up to 20 cars, have been installed in the employee car park at the Chamber of Commerce, where the most popular vehicle is the Renault Zoe. For the execution of the complete project, it was essential for Ingeteam to work together with the other companies involved: Automobilité, Loelec and Mobily Green.    - Automobilité, the company heading the project, selected Ingeteam to supply the chargers to the installing company and to the mobility operator.     - Loelec was the company charged with the installation of the 10 INGEREV® FUSION chargers and is responsible for the equipment field maintenance.      - Mobily Green, is to perform the maintenance of the charger software. The EV chargers developed by Ingeteam feature all kinds of technological innovations. If you're interested count on us!  Ingeteam in France Ingeteam has now been established in France for the last decade. During this time, the company has been involved in more than 100 projects with almost one Gigawatt of installed solar power. In 2010, the Group took the decision to open a subsidiary in Toulouse, directed at marketing its PV inverters and offering operation and maintenance services in France. Last year Ingeteam extended its offer still further with the addition of its EV charging systems, a market which is receiving considerable support from the French government.  Mon, 02 Nov 2020 07:38:00 GMT f1397696-738c-4295-afcd-943feb885714:2657 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2654/language/en-US/How-do-solutions-developed-by-Ingeteam-favor-the-fight-against-climate-change.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=2654 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2654&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2654/language/en-US/How-do-solutions-developed-by-Ingeteam-favor-the-fight-against-climate-change.aspx Ingeteam project is based on helping to decarbonise society and bring about an energy transformation towards an increasingly electricity-based society. The underlying technology involves all 3 of the Group’s main technology vectors: rotating electric machines, power electronics and automation and control. Ingeteam provides innovative solutions in operation and maintenance which are becoming increasingly important in sectors related to renewables. The application of this base to different technologies contributes directly to the reduction of CO2 emissions into the atmosphere. These developments favour the achievement of the Sustainable Development Goals (SDG) 7, 11 and 13 mainly. SDG 7. Affordable and clean energy The introduction and growth of renewables so as to make the world more sustainable is vital to meeting this goal. The Group acts as a driver in developing products conducive to the decarbonisation and electrification of society. We also seek to improve energy efficiency in processes that require large-scale exchanges of energy. SDG 11. Sustainable cities and communities Cities are focal points for ideas, trade, culture, science, productivity, social devel-opment and much more. They are also growing, as is the world’s population. At Ingeteam we contribute to sustainability in cities by facilitating sustainable movement with rail traction and electrical mobility products. We also encourage social actions in favour of different institutions and organisations in society. SDG 13. Climate Action  Climate change affects all countries on all continents, and has negative effects on the economies and on the lives of individuals and communities. Greenhouse gas emis-sions are at record high levels. At Ingeteam we are particularly careful in preventing pollution in the manufacturing processes of our products and with their useful lifetimes, and have helped to prevent the emission of more than 13 t of CO2 into the atmos-phere. Thu, 22 Oct 2020 13:05:00 GMT f1397696-738c-4295-afcd-943feb885714:2654 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2647/language/en-US/Ingeteams-new-high-power-DFIG-wind-converters-obtain-certification.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=2647 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2647&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2647/language/en-US/Ingeteams-new-high-power-DFIG-wind-converters-obtain-certification.aspx Ingeteam, a global technology Group specialized in electric power conversion, presented today the rigorous validation process undergone by its new high power DFIG wind converters. Ingeteam’s converters are tested and labelled to comply with and facilitate the full wind turbine certification process, whatever the site. Mon, 05 Oct 2020 08:00:00 GMT f1397696-738c-4295-afcd-943feb885714:2647 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2646/language/en-US/Successful-commissioning-of-a-variable-speed-drive-for-the-SAG-and-Ball-Mills-of-a-copper-mine-in-Nevada-USA.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=2646 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2646&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2646/language/en-US/Successful-commissioning-of-a-variable-speed-drive-for-the-SAG-and-Ball-Mills-of-a-copper-mine-in-Nevada-USA.aspx The MV100 3400 HP, a UL certified variable speed drive of the INGEDRIVE ™ range, is integrated in the grinding system of a copper mine in Nevada, USA. In the first quarter of 2020, the commissioning of the medium-voltage variable speed drive for starting up the SAG and ball mills was successfully completed using the SBRS (Start Ball Run SAG) system. This system starts up the ball mill progressively until it reaches its rated speed, at which point the drive synchronizes the ball mill to the grid frequency to switch to fixed speed operation. After that, it is connected to the SAG mill which works at a variable speed while remaining under control by the drive at all times. Besides the frequency converter, Ingeteam also supplied the transformers and the cabinet with the bypass contactors. Ingeteam expresses its gratitude to FLSmidth for the trust they have placed in us by granting us this project, as well as for all the assistance and support provided during its development. We hope that in the future we can have other projects in common. Tue, 29 Sep 2020 10:14:00 GMT f1397696-738c-4295-afcd-943feb885714:2646 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2629/language/en-US/Ingeteam-will-supply-protection-and-control-systems-to-two-new-windfarms-in-Italy.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=2629 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2629&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2629/language/en-US/Ingeteam-will-supply-protection-and-control-systems-to-two-new-windfarms-in-Italy.aspx Ingeteam has been awarded with the supply of the protection and control systems for two new windfarms in Southern Italy: Craco and Serracapriola, which will be installed during 2021. The scope of the project consists of the different protection, control and measurement system, as well as the detailed engineering services, logic project, FAT and commissioning of the substation. For this supply, the INGEPAC™ EF equipment platform from Ingeteam will be used, based on the IEC 61850 standard and containing the latest technology in automation systems. With these new contracts Ingeteam will reach over 400 MW of renewable energy evacuated in the country, distributed in 14 projects developed since 2012. Tue, 22 Sep 2020 09:30:00 GMT f1397696-738c-4295-afcd-943feb885714:2629 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2633/language/en-US/INGEPAC-EF-and-INGEPAC-DA-devices-incorporate-the-IEC-61850-flexible-model.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=2633 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2633&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2633/language/en-US/INGEPAC-EF-and-INGEPAC-DA-devices-incorporate-the-IEC-61850-flexible-model.aspx The Ingeteam INGEPAC™ EF and INGEPAC™ DA units incorporate the IEC 61850 flexible model functionality, which allows the user to request the adaptation of the equipment data model to their preferences or requirements, including: Rename logical devices Rename prefixes and logical node instances Create new logical devices and move to them logical nodes of the predefined logical devices Thu, 17 Sep 2020 09:00:00 GMT f1397696-738c-4295-afcd-943feb885714:2633 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2622/language/en-US/Ingeteam-selected-as-the-electrical-system-integrator-for-Jan-De-Nuls-Heavy-Lift-Vessel-Les-Alizes-built-at-China-Merchants-Heavy-Industry-Haimen.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=2622 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2622&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2622/language/en-US/Ingeteam-selected-as-the-electrical-system-integrator-for-Jan-De-Nuls-Heavy-Lift-Vessel-Les-Alizes-built-at-China-Merchants-Heavy-Industry-Haimen.aspx Ingeteam signed a contract as the electrical system integrator for the new Heavy Lift Vessel named “Les Alizés” owned by Jan De Nul Group. The vessel will be built at China Merchants Heavy Industry Haimen shipyard and scheduled for delivery in the first quarter of 2022. Les Alizés will be in a super-size class of its own, capable of building the newest generation of offshore wind farms. She will be equipped with a main crane of 5,000 tons, a deck loading capacity of 61,000 tons and a deck space of 9,300 m².  Thanks to her dimensions and impressive lifting and loading capacities, Les Alizés will be able to load out, transport and install multiple units of the largest and heaviest wind turbine foundations, several in one trip, to the offshore installation site, with direct benefits in planning, fuel consumption and emissions reduction. In addition, equipped with a high-performance DP2 system as a crane vessel for floating installation, she will be able to install heavier and larger foundations into deeper waters and in more challenging seabed conditions. Les Alizés will be an Ultra-Low Emission vessel equipped with an exhaust gas filtering technology that complies with the EURO STAGE V guidelines for emissions on land and inland waterways, and will also have a Cleanship NDO7 label and a Green Passport EU label. The vessel will mainly be used for the construction of offshore wind farms, but with her impressive crane she is also extremely suitable for decommissioning offshore oil and gas platforms.  Ingeteam has been appointed as electrical system integrator providing the engineering, supply, commissioning and sea trials of the complete Electrical power System as well as the Alarm Monitoring and Control System for this outstanding vessel, comprising: Generation: by 6 INDAR generators of 8640 kVA/ 11000 Vac, Ingeteam Power Management System (PMS). Power distribution: including 11000 Vac main and auxiliary switchboards and distribution transformers. Propulsion system comprised by: ·         4 main propulsion INDAR´s Motors of 3000 kW / 3150 Vac driven by DFE frequency converters Ingedrive MV100. ·         2 Bow Thruster INDAR Motor 2600 kW / 3150 Vac driven by bow thruster DFE frequency converter Ingedrive MV100. ·         2 Retractable Thruster INDAR Motors 3250 kW / 3150 Vac driven by retractable thruster DFE frequency converters Ingedrive MV100. Energy Saving System controlled by INGESHIP Energy Management System (EMS). Engineering, Workshop Testing, Commissioning and Sea Trials. Highlights of Ingeteam´s scope of supply for Integrated Alarm & Monitoring Control System: ·         PLC´s Network and HMI ·         INGESHIP-IAS , Integrated Alarm & Monitoring System (over 12.000 I/O signals) ·         INGESHIP- RAS, Remote Access Service ·         Instrumentation ·         Engineering and Workshop Testing ·         Commissioning and Sea Trials Ingeteam values the trust our customers put in our systems, products and services. We are proud to continue our cooperation with Jan De Nul Group, being selected as the electrical system integrator for this remarkable project and we are excited to start our collaboration with China Merchants Heavy Industry (CMHI) shipyard.   Tue, 15 Sep 2020 08:00:00 GMT f1397696-738c-4295-afcd-943feb885714:2622 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2621/language/en-US/Ingeteam-is-focusing-on-the-international-market-for-its-EV-chargers.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=2621 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2621&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2621/language/en-US/Ingeteam-is-focusing-on-the-international-market-for-its-EV-chargers.aspx - Ingeteam is one of Spain's leading manufacturers of EV chargers. - To date, the company's charging systems have been installed in over 20 countries, with exports to international markets expected to reach 80% of sector sales in the next few years.   A decade ago, Ingeteam started to produce chargers for electric vehicles and, at present, the company has become one of the leading manufacturers in Spain. The company's next challenge is to complete the launch of its products on the international market where it already has important references in Europe and South America. A contribution to decarbonization and the energy transition to an increasingly more electrified society, underpin the activities of the Ingeteam Group. In order to achieve these objectives, the promotion of sustainable mobility in the company is a priority. Mikel Borrega, the Head of the Ingeteam EV charger business unit, reveals that "if the EV market continues with its present growth, we expect to have a 35% year-on-year increase in sales over the next three years". This, in turn, would result in a further increase in the already heavy investment made over the last four years, during which the number of employees in this business unit has grown threefold. Mikel added that "over the next three years, we would like to expand exports to 80% of our sales". Ingeteam's EV charging systems can currently be found in more than 20 countries. The latest countries to be added to the list are Portugal, Greece and the Ukraine, all from the European continent, a market targeted by Ingeteam over the last few years. Now Ingeteam is broadening its horizon to include the American continent, starting with the Latin American countries in which Ingeteam already has either branch offices or factories, such as Brazil, Mexico and Chile. Ultra-rapid charging Ingeteam is noted as a manufacturer of EV chargers for installation in public places, particularly the DC models, with the potential to deliver up to 400 kW. The most powerful charging station in Europe is equipped with four terminals manufactured by Ingeteam and is able to make an ultra-rapid charge of 400 kW. This makes it possible to charge a vehicle battery in five to ten minutes, similar to the normal time taken to refuel a vehicle. This ultra-rapid charger model is a real revolution in the large-scale charging installations sector, given that it offers the possibility to create large-scale charging installations (up to 1 MW), minimizing civil works and simplifying the installation and commissioning work. Furthermore, the integration of storage systems into the system and the provision of renewable energies is simple and easily manageable thanks to Ingeteam's experience in large-scale installations. As far as technology is concerned, Ingeteam has developed some extremely compact power electronics, making it possible to distribute the electronics in the energy dispensers. This brings a number of advantages such as a more compact, flexible system that is able to simplify future upgrades in order to increase the power or the number of dispensers. To date, Ingeteam has supplied more than 4,500 EV charging points, in both AC and DC, installed in countries such as Spain, Italy, South Africa, Mexico, Turkey, United Kingdom and Australia.   Thu, 10 Sep 2020 06:25:00 GMT f1397696-738c-4295-afcd-943feb885714:2621 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2619/language/en-US/Ingeteam-offers-new-Single-VFD-Solutions-for-soft-starting-a-series-of-LNG-compressors.aspx#Comments 0 https://www.ingeteam.com/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=3366&ModuleID=3021&ArticleID=2619 https://www.ingeteam.com:443/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2619&PortalID=1&TabID=3366 https://www.ingeteam.com/it/Redazione/tabid/3366/articleType/ArticleView/articleId/2619/language/en-US/Ingeteam-offers-new-Single-VFD-Solutions-for-soft-starting-a-series-of-LNG-compressors.aspx Due to the remote location, poor grid quality, and large inrush current associated with the direct on-line (DOL) connection of electrical motors, INGEDRIVE™ Variable Frequency Drives (VFDs) are becoming more commonly used as motor starters. By nature, a VFD is able to limit the inrush current being supplied to the motor to a minimal percentage of the rated current of the motor, allowing it to have a small impact on the grid upon starting, while also being able to start the unloaded compressor with the time window specified by the operator. This is something that soft-starters cannot accomplish, since they are not able to fully control the inrush current supplied to motor. Additionally, the VFD has the capability to vary the rotational speed of the motor by delivering a variable frequency output. This allows the system operator to operate at reduced levels during times when full load production is not desired Basis of Operation As per a project developed for a privately held midstream company in the United States, the operator sends the Start Motor #X command in order to start one of the LNG compressors, and the VFD closes the appropriate Variable Speed Contactor, connecting the output of the VFD with the unloaded motor that is to be started. The VFD will start the motor by gradually increasing the output frequency until it is spinning at the rated speed. Once the rated speed is achieved, the VFD will synchronize the output phases of the VFD with the grid. After the synchronization of the VFD Output and the Grid has been confirmed, the Full Speed Contactor will be closed. There is a momentary overlap when both the Variable Speed Contactor and the Full Speed Contactor are closed, making it a bump-less transfer involves negligible mechanical torque pulsations. Unlike some other VFD systems, we offer the possibility of using no additional output reactors on the output of the INGEDRIVE™ VFD to have a Closed or bump-less transfer since the sinusoidal output filter can be added as a standard feature in the VFD. Once the Full Speed Contactor has been closed, the transfer can be completed by opening the Variable Speed Contactor, leaving the electrical motor connected to the grid for full speed operation. This process can be repeated for all four of the motors. When the motor is to be stopped, the Full Speed Contactor is opened, allowing the motors to freewheel down to zero speed, or the Variable Speed Contactor can be reconnected for a controlled stop. Converter driven compressor soft-start diagram. INGEDRIVE™ Frequency Converters INGEDRIVE™ is available with powers up to 44 MVA, from 400 V to 690 V in low voltage and from 3 kV to 6.9 kV in medium voltage, offering a high level of performance and reliability together with a user-friendly interface. About Ingeteam Group Ingeteam is an International Technological Group specialized in electric power conversion. Ingeteam’s state of the art developments in power and control electronics (inverters, frequency converters, controllers and protections), rotating electric machines (Indar motors, generators and submersible motor & pumps sets), systems (electromechanical engineering and automation projects), and services (operation & maintenance services), enables the organization to provide the best solutions in a wide variety of sectors, namely: wind, solar PV, hydro and fossil fuel power generation, metal and mineral processing, mining, marine, rail traction, water, e-vehicle charging and power grid automation, always achieving sustainable and efficient energy generation, transmission, distribution and consumption. The company operates throughout the world, and is permanently based in 24 countries, with a headcount of more than 4,100 employees. Continuous innovation, research and development are the backbone of Ingeteam’s business activity, as 5% of The Ingeteam Group turnover is annually invested in R&D.   Aitor Martinez | Sales Manager, Industry & Marine Drives, Ingeteam Power Technology. David Benson | General Manager, Industry & Marine Drives, Ingeteam Inc. Wed, 05 Aug 2020 10:45:00 GMT f1397696-738c-4295-afcd-943feb885714:2619