The INGEREV CITY charging station has been specially conceived for an urban installation. Thus, it features an anti-vandal protection that makes it suitable for outdoor environments.
These equipment present a current inlet according to the IEC 62196-2 standard, allowing to charge in mode 3 (IEC 61851), guaranteeing a secure charging process. In addition, the charging station has a domestic input to charge in modes 1 and 2. Both inputs feature a cable retention and blocking system in order to avoid its disconnection from a non-authorised user.
The INGEREV CITY charging station is available in both single and three-phase versions, with an output power ranging from 3.7 to 22 kW. In the event of a grid outage, the stations automatically recover their previous state, guaranteeing the correct ending of the charging process.
There are two different models depending on the installation mode:
Thanks to their communication capacities, it is possible to identify the users and to charge them according to the established rate, by using a software from Ingeteam or from a third party.
SOFTWARE AND COMMUNICATIONS
It is possible to interconnect the INGEREV CITY charging station with up to ten other different stations by adding a RS-485 hardware. It is also possible to remotely access the equipment by adding an Ethernet or GPRS/3G hardware and integrating the charging stations into a control centre. The INGEREV charging stations support the OCPP protocol and they can be integrated into most of the charging managers' control systems.
Technical Assistance Service
In case of an incident with an INGEREV CITY charging station, please contact our Technical Assistance Service at the telephone 0034 948 698 715 or at the e-mail address email@example.com